I'm not sure which newsgroup to put this on, but here goes:
Does anyone know a way for a non-programmer to use configuration files to
get a different use out of the MTRS button?
Thanks!
David
Printable View
I'm not sure which newsgroup to put this on, but here goes:
Does anyone know a way for a non-programmer to use configuration files to
get a different use out of the MTRS button?
Thanks!
David
Hello David,
>
> Does anyone know a way for a non-programmer to use configuration files to
> get a different use out of the MTRS button?
>
As far I know the MTRS button is a part of the "hardprogramming" of the
EFIS/MCP Aerosoft driver software. I don't think you can change it.
Btw, Metres indication is necessary above Russian federation and China
as ATC there is done in metres altitudes instead of feet.
Maybe it can be change in the special drivers Enrico has programmed, but
this I don't know.
Ciao
Michel
--------------------------
Michel VANDAELE
Member of the board FSCB
EBOS2002 Designteam
My B744 simulator project
http://users.pandora.be/michel.vandaele/sim1.htm
Hi,
I think it can be reprogrammed if you use the direct serial connection, i.e.
do not use the aerosoft driver.
Ciao
Enrico
"David Rabiner" wrote in message
news:272257.54063@wb.onvix.com...
> I'm not sure which newsgroup to put this on, but here goes:
>
> Does anyone know a way for a non-programmer to use configuration files to
> get a different use out of the MTRS button?
>
> Thanks!
>
> David
>
Thanks, Michel.
That's good to know. I tend not to fly over there, but I could change the
button back when that does happen .
Warm regards,
David
"Michel Vandaele" wrote in message
news:272299.54063@wb.onvix.com...
> Hello David,
>>
>> Does anyone know a way for a non-programmer to use configuration files
to
>
>> get a different use out of the MTRS button?
>>
> As far I know the MTRS button is a part of the "hardprogramming" of the
> EFIS/MCP Aerosoft driver software. I don't think you can change it.
>
> Btw, Metres indication is necessary above Russian federation and China
> as ATC there is done in metres altitudes instead of feet.
>
> Maybe it can be change in the special drivers Enrico has programmed, but
> this I don't know.
>
> Ciao
>
> Michel
> --------------------------
> Michel VANDAELE
> Member of the board FSCB
> EBOS2002 Designteam
> My B744 simulator project
> http://users.pandora.be/michel.vandaele/sim1.htm
>
>
Hmmm, Enrico. Please say where there are docs to show me how to make that
change. There's no reason why I can't plug it into a serial port. I don't
lose performance significantly, do I?
Thanks!
Warm regards,
David
"Enrico Schiratti" wrote in message
news:272368.54063@wb.onvix.com...
> Hi,
>
> I think it can be reprogrammed if you use the direct serial connection,
> i.e.
>
> do not use the aerosoft driver.
>
> Ciao
>
> Enrico
>
> "David Rabiner" wrote in message
> news:272257.54063@wb.onvix.com...
>> I'm not sure which newsgroup to put this on, but here goes:
>>
>> Does anyone know a way for a non-programmer to use configuration files
to
>> get a different use out of the MTRS button?
>>
>> Thanks!
>>
>> David
>>
>
Hi,
> Hmmm, Enrico. Please say where there are docs to show me how to make
that
> change. There's no reason why I can't plug it into a serial port. I
> don't
> lose performance significantly, do I?
If anything, you gain performance because there is one less consumer on the
network.
No particular docs, just edit the MCP.INI file and set AerosoftComm= to
whatever COM port the MCP is on.
Ciao
Enrico
> "Enrico Schiratti" wrote in message
> news:272368.54063@wb.onvix.com...
>> Hi,
>>
>> I think it can be reprogrammed if you use the direct serial connection,
>> i.e.
>>
>> do not use the aerosoft driver.
>>
>> Ciao
>>
>> Enrico
>>
>> "David Rabiner" wrote in message
>> news:272257.54063@wb.onvix.com...
>>> I'm not sure which newsgroup to put this on, but here goes:
>>>
>>> Does anyone know a way for a non-programmer to use configuration files
> to
>>> get a different use out of the MTRS button?
>>>
>>> Thanks!
>>>
>>> David
>>>
>>
>