newbie from france: new A320 hc

hi,
i'm on fsx and ivao sinces years...
i decided to try to build a A320 home cockpit
at this time, i finish the cockpit map, i choose some p&p device on skarlaki ... the beginning approach !

i'll needed some help in this building,
i hope you can help me sometimes :)

the project:
a mip and front panel home made
gauges on PC screen
overhead touch screen
pedestal home made
autobreak, landing gear, com, tcas: skarlaki

i'm actually using the A320 aerosoft, but i'm realy questionning about it because of there is not pop up gauges to export on my panels
this last day, i try to create popup gauges, but the ND is a real problem (i read a lot of post, and it seams to be a big problem for all)...

so , a lot of questions, hoping for some advice !

thanks :)

Change your software to Jeehell, its free, will do all you need and is fully compatible with Skalarki hardware.
Other than that your plan sounds good so go with it.
You will find lots of help from everyone here.
John

Quote:

---

Originally Posted by lushka

so , a lot of questions, hoping for some advice !

thanks :)

---

Bonjour Luskhka,

I run a blog -- http://www.soarbywire.com

Hopefully it can be helpful for Airbus cockpit builders; the software available for Airbus builders to choose among -- Jeehell FMGS (available free for non-commercial use), ProsimA320, and the upcoming FSL A320 Professional (cockpit builder edition).

Merde!

Ben

thanks for reply !
jeehell seems realy realy good, but i get one serious problem with it:
i have a mcp combo (vr insight), and it seems not be compatible
for now i want to keep it , and buy the real airbus at the end , in a few years...
i read some post about it, and jeehell advise to change the script ... and i'm realy not sure to be able to do that ...

but maybe the vr insight is now compatible ?
(its the combo 2 boeing, i buy it when i was on pmdg, and now i use it with linda)
thanks a lot !

thanks for answers !
I've look at the jeehell software, it seems good, but it seems realy difficult to use and instal ?
prosim is realy not a option (i'm not so rich ;) )
but the fs lab is realy what i'm looking for, it cost 100 euros, and seems to be like the pmdg with popups ...
do you have any experience with it ?

thanks a lot !

i try to run jeehell ,
the installation was very simple, but when i run the starter: i put full thrust , the plane move a little then stopped,
on the ecas the abrk are max, but i cant find any way to stop them ...

Quote:

---

Originally Posted by lushka

thanks for answers !
I've look at the jeehell software, it seems good, but it seems realy difficult to use and instal ?
prosim is realy not a option (i'm not so rich ;) )
but the fs lab is realy what i'm looking for, it cost 100 euros, and seems to be like the pmdg with popups ...
do you have any experience with it ?

thanks a lot !

---

The FS Lab A320X on available now is not the cockpit builders edition. You can undock the panels, but at a huge performance cost). In addition you can't interface any of your hardware with the software because the API has not been released and no drivers have been written. You also cannot run the software over a network on multiple computers.

My advice -- stick with Jeehell FMGS -- many of us here have done so and there is a dedicated support forum --

http://www.mycockpit.org/forums/forumdisplay.php?f=263

thanks for the advise, i'll follow it !

thanks for the advise:D

I think this is one of the most significant information for me. And i'm glad reading your article. But want to remark on few general things, The web site style is wonderful, the articles is really excellent : D. Good job, cheersTake a look at my page ecu remapping before and after