Hi,
I will correct the gload at 0 soon, not a big bug.
However, I would to know who does get issues with ECAM LEDs/inputs and who does not, please specify which hardware you use.
JL
Printable View
Hi,
I will correct the gload at 0 soon, not a big bug.
However, I would to know who does get issues with ECAM LEDs/inputs and who does not, please specify which hardware you use.
JL
Also, one important thing: the LEDs should only light up when the ECAM pages are manually selected. When the ECAM automatically chooses which page to show, the relevant LED stays off.
Hello Everybody,
I just remembered that I had similar problems with the ECAM keys yesterday (Opencockpits Hardware). But i had no time to make some more tests because of much workload on my online flight. Sorry i had forgotten.
On my next flight I make some more tests and explain you.
I will do some more testing, but from my recollection the only LEDs that light up are 'SYS' (when manually selected), and 'CLR'.
For some reason my ALL button also has a back light LED, but this is not assignable with IITCreator.
Do the TO Config, EMER CANC, ALL, and RCL buttons not light up?
TO CONFIG, EMER CANCEL, RCL and ALL buttons do not have LEDs builtin in hte real aircraft.
Hello JL
I have a similar problem with ECAM. Using FSCOKPIT. Some buttons work correctly others don't. EX: I press fuel and Get Hydraulics. The ALL button seems to function correctly.
On another note, My GSX does not recognise that Parking Brake is set and therefore unable to use GSX completely . It keeps requiring to SET Parking Brake.
Thanks
Thank you for the clarification JL. I've wired up the backlight the ECAM panal now, it seems when INTEG LT brightness is turned up, all the LED buttons on the ECAM also light up. Is this the correction action, or should there really be 2 LEDs within each button (one backlights the selected ECAM, and the other led back lights the 'words' when the backlighting of the aircraft is turned on)?
--
more testing, and it turns out there is a brighter LED that lights up when the ECAM page is selected, so there seems to be indeed 2 LEDs.
Big changes coming...thanks jeehell for your great work