HI all,
I wanted to control and change the fuel flow value in my PM cockpit as the fuel flow from the flight simulator is wrong. I find a few offset for fuel flow which are listed below. I try to write value into those offsets but nothing happen. Can some1 enlightening me?
<TABLE cellSpacing=0 cellPadding=2 width="80%" border=1><TBODY><TR><TD vAlign=top width=57>08A0</TD><TD vAlign=top width=65>2</TD><TD vAlign=top>Engine 1 Fuel Flow PPH SSL (pounds per hour, standardised to sea level). Don’t know units, but it seems to match some gauges if divided by 128. Not maintained in all cases.</TD></TR></TBODY></TABLE>
<TABLE cellSpacing=0 cellPadding=2 width="80%" border=1><TBODY><TR><TD vAlign=top width=57>0918</TD><TD vAlign=top width=65>8</TD><TD vAlign=top>Engine 1 Fuel Flow Pounds per Hour, as floating point double (FLOAT64)</TD></TR></TBODY></TABLE>
<TABLE cellSpacing=0 cellPadding=2 width="80%" border=1><TBODY><TR><TD vAlign=top width=57>2020</TD><TD vAlign=top width=65>8</TD><TD vAlign=top>Turbine Engine 1 corrected fuel flow (pounds per hour) as a double (FLOAT64). This is for jets and turboprops—it has no meaning on reciprocating prop aircraft</TD></TR></TBODY></TABLE>
<TABLE cellSpacing=0 cellPadding=2 width="80%" border=1><TBODY><TR><TD vAlign=top width=57>2060</TD><TD vAlign=top width=65>8</TD><TD vAlign=top>Turbine Engine 1 fuel flow (pounds per hour) as a double (FLOAT64). This is for jets and turboprops.</TD></TR></TBODY></TABLE>
Regards,
ray