GC 737 EICAS value slow bug!!!

Hi, i have problems with the eicas screen (737) values, i noted that they are updated to slowly, for example when i start theEngine at N2 46% the starter switch returns to off, if you monitor the 737 default panel and PMsystems it's is triggered correctly, but in eicas page N2 increasing i very slowly (other values also, EGT etc.), i have tried all wideclient settings, but is not a problem with it, infact i discovered that it happens also in the same machine as FS is running!

This is very strange, 'cause i want to monitor the N2 values correctly, and when my solenoid is triggered, N2 values is still behind!

Can you look further?

**mailed to PM support!

Got a reply from PM, playing with those values seems to solve the problem:

N1StartupDelay=0
N2StartupDelay=0

Thanks for sharing the response! It is a good idea to share what you hear from PM.

A correction about 46% value,
Starter cutout is approx 46% N2 -3/4/500; 56% N2 -NG's.

Quote:

---

Originally Posted by dcutugno

Got a reply from PM, playing with those values seems to solve the problem:

N1StartupDelay=0
N2StartupDelay=0

---

Hi,
which ini? PM-systems or GC?

Thanks,
Hans

The ini file for the copy of PM that runs the ECIAS.....

No, in the aircraft type .txt in GC or CDU it depends if you have set Type=CDU or not.