Setting up a 3 PC network

Hi all,

I was looking for some pointers in approaching the setting up of a 3 Pc network.

I currently have a network all set up (running PM) across 2 PCs, using a crossover cable.

But I am considering adding a 3rd PC, (that will be dedicated to running the PM EICAS screen).

Can anyone recommend a good switch / router, and also, what is involved in the set-up when moving from a 'crossover cable' based network to a switch based network ?

Many thanks in advance for any pointers!

Hi David,

In essence you should be able to replace the crossover cables with straight through cables directly into the ports on the switch. And shouldn't have to change anything. You will just have to pick a new IP address for the 3rd PC. and set the gateway the same as you did on each of the other 2 pc's.

Best regards

Trev.

PS I would Buy a Linksys switch/router before I would buy a dlink.

Good luck.

Trev

Quote:

---

Originally Posted by Trevor Hale

PS I would Buy a Linksys switch/router before I would buy a dlink.

Good luck.

Trev

---

...I can second that- My dlink didnt last too long but it could have been a bad batch of routers.

Great news - that sounds like something even I could manage :)

I shall get checking out Linksys on eBay right away!

Thanks,

I'm using a Cisco Systems 8 port switch. Works fine.

best,

..................john

Hi,

Just bought a switch and 3 network ethernet cables;

I too went for a Cisco 8 port'er! There was only 1 Linksys available at the time in the UK and the seller's feedback was poor. The price and spec was right for the Cisco so went forit.

I'll let you know how I get on in linking this up with my 2 existing PCs.... then need to find another cheap P4 !

Quote:

---

Originally Posted by JBaymore

I'm using a Cisco Systems 8 port switch. Works fine.

best,

..................john

---

LOL John... Cisco Owns Linksys :)

Quote:

---

Originally Posted by David Rogers

Hi,

Just bought a switch and 3 network ethernet cables;

I too went for a Cisco 8 port'er! There was only 1 Linksys available at the time in the UK and the seller's feedback was poor. The price and spec was right for the Cisco so went forit.

I'll let you know how I get on in linking this up with my 2 existing PCs.... then need to find another cheap P4 !

---

Perfect, Cisco is high end Linksys, so this should be easy as pie for you. The only trick is if you want those computers to access the internet, you will need to do an "IPCONFIG /ALL" from the dos prompt of the windows machine connected to the internet, and write down the "DNS" Ip address and add this to the machines on your switch. under the DNS tab in the same place you changed the ip addresses.

if you don't do this, you just won't be able to search the internet from those computers.

Let us know how it goes.

Trev

Excellent - Thanks Trev - I copied that advice into my 'scratchpad' to refer to once the box comes!

As always, much appreciated.