ENG 1 and 2 are running, but both power plants are not producting hydraulic pressure. Please see attached image, taken from the flight desk. P3Dv5 HF1 and Jeehell B53.2.0
Printable View
ENG 1 and 2 are running, but both power plants are not producting hydraulic pressure. Please see attached image, taken from the flight desk. P3Dv5 HF1 and Jeehell B53.2.0
With skalarki hardware do you have the aft overhead? If so, there some HYD bypass valves there, check those switches.
Do you use the latest Skalarki Profiler?Marcin did some corrections last month, fixing the hydraulic pressure issue. I had experienced the same.Michael
using the front OVHD only, have running IO profiler 5.1.30.1000 the updater within says: Software ist up to date. Thanks for the hint, will ask Marcin directly.
The problem is solved. During the compleate new installation of the Master PC, I have checked in Skalarki IO profiler "MAINT" as available (located in AFT OVHD which I don't still own at the moment). There can be activated bypass switches for the ground crew to check any leakage of the hydraulic system. So the FMGS displayed right, that no hydraulic pressure is availabe (bypass are open in my case) Can anyone of the real A320 pilots please tell, if there is an ECAM message displayed when the bypasses are open? all the best, Frank