Changed mixture linkages

Just thought I would share my little update to my mixture controls.

First the back story. Changing out the copper phillips head screws to black allen button head screws. Well, the button heads are a little longer than the original screws and when I went to replace the screws holding the plate the slider pots are attached to I crushed one..oops:roll:. So i replace the pot and broke the linkage (the originals were just cheap thin brazing rod, and they broke easily). Had to replace it, so I figured I would replace all 4 of them. Here are the results, let me know what you think.

OLD:
Attachment 4540

NEW:
Attachment 4541