sound and servo question?
I have a few questions. I have been playing around with the fs2phidgets program and one of my projects will be a vertical speed indicator using a servo. FS give a negative number when climbing and a positive number in a decent. But my servo will only react to the positive numbers. Is there anyway to place the servo in its center position when FS gives a 0, indicating level flight, and then increase the servo on negative numbers, indicating a climb, and decrease the servo on positive numbers, indicating a decent . I hope to use servos to build my gauges and this problem occurs in both VS gauge and turn indicator gauge. My second question is about the sound, I tried this out yesterday but nothing happened , I can hear the sounds in FS but not the added sounds from FS2Phidgets, the ini file show the path to the sound and I noticed a smin=0 and smax=0. Thinking these may be volume controls I tried changing the values with no success. I plan on building several gauges and instruments using fs2phidgets and servos, but I am just testing out the electronics to see if it will work before cutting the parts and putting in the time.
Thanks for you help in advance
Frank