PMSystems, Phidgets, Recall Switch and Sixpack
Hi Peter and other fellow builders,
Yes I finally got around to wiring the six pack annunciators and recall switch and the offset 56F8.1 worked like a charm in activating the recall switch
But I've hit a problem with phidgets and pmsystems....
This weekend I took the opportunity to finish the Capt side sixpack annunciators and recall switch.
Now I'm wiring and testing using Phidgets, PMSystems and FS2Phidgets, but I've hit some problems that some of you may have encountered and have a solution for....
Basically what happens is when a sixpack annunciator (controlled by PMSystems) is lit, then when I press the recall switch, I want all the sixpack annunciators to light up (while the momentary recall switch is pressed), then when released it should light up any annunciators that indicated a problem condition and extinguish all others.
I tried doing this by assigning (using a LED64 Phidget) the various annunciators in the phidgets.txt file used by PMSystems. I then assigned all the annunciators and the recall switch to one common circuit under FS2Phidgets and made it "Push to Test".
So far so good. When I press the recall switch every annunciator lights uphttp://www.mycockpit.org/forums/imag.../icon_cool.gif and when I release the switch it all goes dark. That is fine.
BUT when PMSystems is started and the sixpack indicates a problem eg "FLT CONT" when the Yaw damper is turned off for example , and the right annunciator lights up, I then press the recall switch and find that everything lights up as expected but when I release the switch everything goes off including the problem indication "FLT CONT" ...which should remain lit. Now when I turn the Yaw Damper back on and the off to re-light the annunciator, it doesn't work at all... PMSystems loses the plot...and toggling the Yaw damper switch only momentarily lights the "FLT CONT" like for about a microsecond or not at all...
When I operate without using FS2Phidgets however the annunciators work fine though PMSystems however I cannot then get the annunciators to light when pressing the recall switch as happens in the real aircraft http://www.mycockpit.org/forums/imag...s/icon_sad.gif as I've lost the ability to assign a circuit via FS2Phidgets...
To me it seems like FS2Phidgets is somehow interfering with the PMSystems logic once the use of the circuit to light all the annunciators is triggered by the recall switch being pressed....
Is there any way around this problem or can I do a similar thing as the circuit function in FS2Phidgets via PMSystems...
Hope to hear from some of you...
Cheers,
Luke<!-- / message -->