Printable View
Hello
I am planning to start building a 737 MIP (captain and center side only) at the beginning i was going to purchase OC I/O cards but i stumbled on the FDS-SYS3X System Interface Card i was amazed by how easy programming and wiring it was. so i would like your opinion should i go for the OC I/O cards or should i go for the FDS-SYS3X System Interface Card . also i know that the fds card is pricier but it would make it much easier to get the MIP ready in less time and less hassle.
THANKS
ANY HELP :(
I did too see this card from FDA, but.... in my cockpit I use all o/c cards few reasons... 1 price big difference 90€ (35€ is usbexpension card need 1usb card per 4 mastercards) vs 230$ converted what not nearly double the price!
2 unless I am reading it wrong FDA=36 switches vs. oc=72switches twice as many for half the price, there is few more outputs on fds card though, but even if you buy 2 oc/mc for total of 135€ you get 144 inputs and.. 80+ outputs and you still paid less they also sell some input connector cards for their master card I think for 15€ I just made my own connections, but that would help if you not good in making your own connectors.
3 when I started I had no idea what the heck sioc is... ?!?! now I have a nearly 100% working 737 cockpit and that is with 737pmdg I have no formal computer programing education yet I learned sioc.. and combine with many scripts all ready written by others and my own resaults are great :)
sorry I don't mean to sound like salesman for opencockpits just sharing my experience.
now if money is an issue you might be better with oc , how handy are you in making these kind of thing you know that best :) how big/sophisticated cockpit do you want to build? I would need 6 fds cards to run my cockpit apprx 200 inputs that's over $1300 I use 3 masters, 1 USB ex pension and 1;outputs card for total of aprx 200€ giva a take few euros
so these are few questions you may wanna ask yourself... what cockpit you build (how many switches),, how handy are you with wireing stuff, and how good are you with computers (learning a bit of sioc)
well I hope it help you in decision making.
Andy
PS I see only captain and center panel ... I started with that too then I looked at it and decided ovh as well now I'm thinking... about enclosure and pedestoll...lol but yeah but originally was suppose to be mip only with autopilot lol
i guess youre right maybe at the beginning of my project my goal will be to make a mip but maybe after a couple of years ill add a ovhd . so i think you have a good point also i am reading many sites on how to program in sioc and i think that ill get the hang of it. in terms of wiring i still have no idea how to wire . ive read many sites and it says "ONCE YOU WIRE FOR THE FIRST TIME YOU WILL GET THE HANG OF IT" But still it doesnt actually show you how to wire.Quote:
Originally Posted by AndyCYXU
thanks for the help anyway
does this help you...?
Attachment 7850
there are 4 groups per each connector in master card each group can have up to MAX 9 switches (inputs) per group;
GREY is common for one group goes to all the 9 switches and RED goes to the other end of switch;
as you can see in example in one group i connected 4 switches in the other 3 switches
it says Invalid Attachment specifiedQuote:
Originally Posted by AndyCYXU
FSX Home Cockpit: mastercard
try in there darn pictures are sideways though might need to rotate them lol
With respect, that is the hard way, though it does show the wiring relationship :D
You are best advised to use ribbon cable connectors to link the Mastercard to "break out" I/O cards as supplied by OC - see this link
IOcards of Opencockpits
It is then a simple matter to connect the wiring using screw terminals. There are tutorials around to show how to wire up input/outputs into these I/O card connectors. If I can find the link, I will post it, else I am sure someone else will know
David
so you pretty much mean its better to use this Conexion entradas for the inputs and this Conexion salidas for the outputs and hook both of them to the master cardQuote:
Originally Posted by fordgt40
Without doubt!:D
Here is an example
guys the idea was just to show which wire is going where :D of course it is easier to buy the connector thingy mabober lol ...
btw its very nicely wired glare-shield ....
Andy
Hm with all this talk about wiring I might just forgo the process and go with cp flight ICS option.
Nothing like plug and play.
Andy
Thanks for comments, I just did not want to put off the OP :D
OmniAtlas
"You pays your money and takes your choice", at the time I built the EFIS units nobody had a product with full functionality. Also, the cost of the CP flight units are approaching 2000 Euro inc tax and delivery. I built my EFIS units (with full functionality) and added a second hand OC MCP for circa 600 Euro. Doubtless, CP flight is better, but to the tune of 1400 euros?
For many the "fun" is in the challenge and reward of building rather than the immediacy and ease of long pockets
David
Very true David.
I am beginning to look at the Input output board produced by cp flight for use with the flyengravity MCP. I have a cp flight MCP, EFIS pro and com radio. I am extremely impressed on how well built the product is. Wiring could bring some considerable cost savings