Help Please MCP Not recognized sioc

I only Just got it today but where it says devices my mcp Is not there , and yes I do have a 5v supply BTW this is opencockpits v2
Please Help

Best Regards

Hi

We need some more info.

Does windows recognize it as a usb device ?
Can you see it in the main SIOC window ?

Regards
Claus
Build your own 737 NG home cockpit

Quote:

---

Originally Posted by claushansen

Hi

We need some more info.

Does windows recognize it as a usb device ?
Can you see it in the main SIOC window ?

Regards
Claus
Build your own 737 NG home cockpit

---

Yes and no to the questions Keep in touch

Quote:

---

Originally Posted by claushansen

Hi

We need some more info.

Does windows recognize it as a usb device ?
Can you see it in the main SIOC window ?

Regards
Claus
Build your own 737 NG home cockpit

---

Yes it does come up as a USB but I cannot see it in sioc mode and yes I do have 5v supply Please help u r my only chance

yes and no, there are 0 clients it says

So Windows can see it.

Can you see it under Devices in the SIOC window ?

Attachment 7738

no it is not in the devices window

well, that why !

You need to install it, so it works with SIOC

I have placed a tutorial on my site, perhaps it can help you

Regards
Claus

Thankyou where can I find your tutorial!!
Found it

Hi it is still not working after what you said even when I do the test mcp thing, the usb is not recognized now on the computer, please help

Are you using a USB hub, if so, is it powered?.
Have you tried using different USB ports on the main computer?
Also, suggest you post your sioc.ini file

Yes I am using a USB port and It is powered
Here is my sioc.ini

Quote:

---

[ fichero de configuracion para el SIOC ver. 4.2 ]
[ Configuration file for SIOC ]




[************** SIOC ***************]


[ Nombre asignado al SIOC ]
[ SIOC name ]
Name=Main


[ Puerto del servidor IOCP ]
[ IOCP port ]
IOCP_port=8092


[ Tiempo de respuesta mلximo de los paquetes IOCP ]
[ IOCP Timeout ]
IOCP_timeout=4000


[ Arranque minimizado en la barra ]
[ Start minimized in tray ]
Minimized=No


[ Retraso necesario para las variables toggles (Project Magenta)]
[ Deley needed for var. toggles (Project Magenta) ]
toggle_delay=20


[ Fichero de configuracion ]
[ Configuration File ]
CONFIG_FILE=.\sioc.ssi


[************** MONITOR MODULE ***************]


[ Desabilitar monitorizacion remota del SIOC ]
[ Remote monitor disable mode yes/no ]
Monitor_disable=No


[ Refresco broadcast monitor (en segundos) ]
[ Broadcast monitor time (seconds) ]
Monitor_time=2




[************** IOCARDS MODULE ***************]


[ Desactivar el mَdulo de las IOCards ]
[ Disable IOCards module ]
IOCard_disable=No


[ Divisor de frecuencia para los ejes analogicos (1-999). Retarda la entrega de valores. ]
[ Frequency divisor for delay the analogic axes. (1-999)]
Divisor_AD=10


[------------- CARDS CONFIG -------------]


[ IOCard Master ]
[...............]


[ Spanish : ]


[ MASTER=(Indice device),(Tipo),(Nْmero de tarjetas),(Nْmero device) ]


[ Indice Device: حndice usado en la variable SIOC como device, para indicar a que tarjeta se hace referencia ]
[ Se usa 0 en el caso de que sَlo haya una tarjeta y no se tenga en cuenta el nْmero de device, por defecto un script en SIOC cuando no se pone parلmetro DEVICE, se hace referencia al يndice 0]


[ tipo = 0 : Emulador de Master Card // OBSOLETO ]
[ tipo = 1 : Tarjeta Master conectada al puerto paralelo directamente // OBSOLETO ]
[ tipo = 2 : Tarjeta Master conectada al puerto paralelo mediante cable de compatibilidad // OBSOLETO ]
[ tipo = 3 : Placa de expansiَn por puerto paralelo // OBSOLETO ]
[ tipo = 4 : Tarjeta USBExpansion usada ]
[ tipo = 5 : Modulo MCP de Opencockpits ]
[ tipo = 6 : Tarjeta USBOutputs ]
[ tipo = 7 : Modulo EFIS de Opencockpits ]
[ tipo = 8 : Modulo Radio COM de Opencockpits ]
[ tipo = 9 : Modulo Radio NAV de Opencockpits ]
[ tipo = 10 : Modulo Radio ADF de Opencockpits ]
[ tipo = 11 : Modulo Radio ATC de Opencockpits ]
[ tipo = 12 : Modulo Radio Airbus RMP de Opencockpits ]
[ tipo = 13 : Modulo FMC-737 de Opencockpits ]
[ tipo = 14 : Tarjeta USBDcmotorPLUS ]




[ Nْmero de tarjetas = Nْmero de placas Master usadas, 1 a 4 para uso de placas de expansiَn, 1 para conexiَn de placa Master directa o del Emulador ]


[ Nْmero de device = 0 en el caso del Emulador o primera tarjeta USB detectada, Direcciَn del puerto paralelo (por ejemplo $0378), o nْmero de dispositivo USB ]




[ Un ejemplo de 2 USBExpansion conectadas con 3 y 2 placas Master ]
[ MASTER=0,4,3,22 ]
[ MASTER=1,4,2,24 ]


[ Un ejemplo de conexiَn a simulador ]
[ MASTER=0,0,1,0 ]




[ English : ]


[ MASTER=(Device index),(Type),(Number of cards),(Device number) ]


[ Device index : Index used in SIOC variable like device, this is the card used for SIOC sentence ]
[ Use 0 for only one card, for this value you not need specify Device number. If you not use DEVICE parameter in a definition in SIOC script, the default index used is 0]


[ type = 0 : Master Card Emulator // OBSOLETE ]
[ type = 1 : Master Card connected directly to parallel port // OBSOLETE ]
[ type = 2 : Master Card connected throught compatibility cable to parallel port //OBSOLETE]
[ type = 3 : Expansion Card connected throught parallel port //OBSOLETE ]
[ type = 4 : USBExpansion Card used ]
[ type = 5 : Opencockpits MCP module ]
[ type = 6 : USBOutputs Card used ]
[ type = 7 : EFIS module ]
[ type = 8 : Radio COM module ]
[ type = 9 : Radio NAV module ]
[ type = 10 : Radio ADF module ]
[ type = 11 : Radio ATC module ]
[ type = 12 : Radio RMP Airbus module ]
[ type = 13 : FMC-737 module ]
[ type = 14 : USBDCmotorPLUS Card used ]


[ Number of Cards = Master cards connecteds, 1 to 4 for expansion cards, 1 for a Master card directly connected or Emulator ]


[ Number of device = 0 for Emulator or first USB card detected, parallel port address, device number for specifies USBexpansion card ]


[ For example, two USBExpansion cards connected with 3 and 2 Master cards used ]
[ MASTER=0,4,3,22 ]
[ MASTER=1,4,2,24 ]


[ For example, use of Master card emulator ]
[ MASTER=0,0,1,0 ]


[ Use the first USBExpansion card connected with only one Master Card attached ]
[ Esta definiciَn es para usar la primera tarjeta USBExpansion que se encuentre instalada que ademلs llevarل conectada una placa Master ]


[MASTER=3,6,1,252]
[MASTER=0,4,1,0]
[MASTER=0,12,1,0]
[MASTER=0,5,1,0]


[ Others Cards / Otras tarjetas ]
[...............................]


[ Spanish : ]


[ Nombre_de_tarjeta=(Indice device),(Nْmero device) ]


[ Indice Device: حndice usado en la variable SIOC como device, para indicar a que tarjeta se hace referencia ]
[ Se usa 0 en el caso de que sَlo haya una tarjeta y no se tenga en cuenta el nْmero de device, por defecto un script en SIOC cuando no se pone parلmetro DEVICE, se hace referencia al يndice 0]


[ Nْmero de device = 0 para usar primera tarjeta USB de este tipo detectada َ nْmero de dispositivo USB ]




[ English : ]


[ Name_of_card=(Device index),(Device number) ]


[ Device index : Index used in SIOC variable like device, this is the card used for SIOC sentence ]
[ Use 0 for only one card, for this value you not need specify Device number. If you not use DEVICE parameter in a definition in SIOC script, the default index used is 0]


[ Number of device = 0 for first USB card of this type detected, or device number for a specifies device ]


[ Ejemplo de dos USBServos en indices 0 y 1, y nْmeros de devices 17 y 23 ]
[ Example of two USBServos for index 0 and 1, and device number 17 and 23 ]


[ USBServos=0,17 ]
[ USBServos=1,23 ]




USBStepper=0,0
USBKeys=0,0
USBServos=0,0
USBRelays=0,0
USBDCmotor=0,0


[ Para los ejes analَgicos se usan los nْmeros de devices de las tarjetas donde estلn alojados ]
[ For analogic axles, you use the device number of cards what allow the axles ]


USBAnalogic=0,0




[************** FSUIPC MODULE ***************]


[ Desabilitar lectura de las FSUIPC ]
[ FSUIPC disable mode yes/no ]
FSUipcdisable=No


[ Refresco recepciَn FSUIPC ]
[ FSUIPC refresh ]
FSUipcRefresh=50




[************** IOCP CLIENTS MODULES ***************]


[ Retraso para inicializacion una vez conectado el cliente en milisegundos ]
[ Delay for initialization when client has been connected in mseconds ]
IOCPini_delay=3000


[************** IOCP CLIENT MODULE #0 ***************]


[ Desactivar el mَdulo cliente IOCP ]
[ Disable IOCP client module ]
IOCPclient0_disable=No


[ IP del servidor donde debe de conectar el cliente ]
[ IOCP client host name ]
IOCPclient0_host=localhost


[ Puerto de envio del protocolo IOCP cliente ]
[ IOCP client port ]
IOCPclient0_port=8099




[************** IOCP CLIENT MODULE #1 ***************]


[ Desactivar el mَdulo cliente IOCP ]
[ Disable IOCP client module ]
IOCPclient1_disable=Yes


[ IP del servidor donde debe de conectar el cliente ]
[ IOCP client host name ]
IOCPclient1_host=localhost


[ Puerto de envio del protocolo IOCP cliente ]
[ IOCP client port ]
IOCPclient1_port=8099




[************** SOUND MODULE ***************]


[ Ficheros de sonido ]
[ Sound Files ]


[ Desactivar el mَdulo de sonido ]
[ Disable Sound module ]
Sound_disable=yes


[ Volumen general de los sonidos 0-100 ]
[ Master Volume 0-100 ]
Volume=100




[ put '*' first filename for loop Sound ]
[ anteponer '*' en el fichero para bucle continuo de sonido]


[ Sound=wav_file,frequency,volume,pan ]
[ frequency=100 to 100000 0=original -1=current ]
[ volume=0 to 100, -1=current ]
[ pan=-100 (left) to +100 (right) 0=center -1=current ]


[ Sound=Fichero_wav,frecuencia,volumen,balance ]
[ frecuencia=100 hasta 100000 0=original -1=Por defecto ]
[ volumen=0 hasta 100 -1=Volumen por defecto ]
[ balance=-100 (Izquierda) hasta +100 (Derecha) 0=centro -1=Por defecto ]


[ #1 ]
Sound=APDis.wav,-1,-1,-1


[ #2 ]
Sound=*outermk.wav,-1,-1,-1


[ #3 ]
Sound=*hello.wav


[************** KEYBOARD EMULATOR MODULE ***************]


[ Nombre exacto de la ventana donde se enviarلn las teclas ]
[ Name of window for key send ]
[window = "Project Magenta Glass Cockpit - Build 396" ]


window =a.txt - Bloc de notas




[ Asignaciَn de teclas ]
[ assign youe keys ]


#1=A
#2=B
#3=C
#4=D
#5=E
#6=F
#7=G
#8=H
#9=I
#10=J
#11=K
#12=L
#13=M
#14=N
#15=O
#16=P
#17=Q
#18=R
#19=S
#20=T
#21=U
#22=V
#23=W
#24=X
#25=Y
#26=Z
#27=1
#28=2
#29=3
#30=4
#31=5
#32=6
#33=7
#34=8
#35=9
#36=0
#37=<
#38=,
#39=.
#40=-
#41=*
#42=+
#43=//
#44=/0
#45=/1
#46=/A
#47=
#48=
#49=
#50=
#51=
#52=
#53=
#54=
#55=
#56=
#57=
#58=
#59=
#60=
#61=
#62=
#63=
#64=
#65=
#66=
#67=
#68=
#69=
#70=
#71=
#72=
#73=
#74=
#75=
#76=
#77=
#78=
#79=
#80=
#81=
#82=
#83=
#84=
#85=
#86=
#87=
#88=<a
#200=<b


[ End of File ]

---

[/PHP]

The MCP should be defined in this ini file accoring to the device id and type.

But if your computer wont find the MCP trough the USB if will nerver work. You will have to get the computer to fnd the MCP first, then it will get an ID number in te SIOC window, and you can continue to config this in file.

If your computer wont find it, try to connect it to anoter one and see if windows reqonize it.

Another try could be to unplug all USB devices and start with the MCP

Try plugging the USB cable into the main PC and not the hub - some USB Hubs are poor. As Claus suggests, when the MCP is recognised, you then need to define the device in the .ini file, but first things first

Hi yes I am plugging it into the main PC and it does not work on other computers either, error code 43!

When you say that it does not work on other computers, I assume that you are not using a hub and that you are plugging it in directly into a different pc`s main USB port. If so, are you sure that the power supply is working properly and giving out 5 volts?

I assume that this is a brand new MCP, if so, then perhaps you should raise this directly with Opencockpits

yes i am using the correct voltage supplied by opencockpits because even when i dont have it plugged in the port some of the leds come on and opencockpits are not replying to my email

Hi, are you using Windows 7 ? If so you have a known problem. Try running the next microsoft tool : http://go.microsoft.com/?linkid=9740816

If that doesn't work, download one of the following and run :
for x86 systems : Download Update for Windows 7 (KB976972) from Official Microsoft Download Center
for x64 systems : Download Update for Windows 7 for x64-based Systems (KB976972) from Official Microsoft Download Center

The last two updates require validation.

The update says "update is not applicable with this computer" And I am using the correct update, I know I have windows 7 and 64bit
WHAT AM I DOING WRONG?!!!!!

Nothing, it's just another MS quirk.
Try the next link : Windows Modules Installer - Error 1450 Insufficient System Resources

Will this ruin my computer? I m a bit of a freak when it comes to this

The error you're getting is the result of the so-called "low registry space" error.
Are you familiar with the registry ? If so you might try the following :

Open the registry editor, surf to :

HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control
Look for the key : RegistrySizeLimit ,it's probably not there.

So right click and choose "new REG_DW0RD", name it RegistrySizeLimit and give it the value 0xffffff and reboot your machine

Now comes the tricky part : go to start, in the search box type "cmd" , command prompt appears at the top of the search window. Right-click and choose "run as administrator" .Verify that the command prompt says c:\windows\system32>

At the command prompt type "sfc /scannow" and everything should be fine again.

What do you mean "At the command prompt type "sfc /scannow" ? where do I put it? oh and when I do this do I try the update again?

I'm sorry, if you're not familiar with registry editing and the command prompt it's probably best not to tinker with it yourself. Maybe you can try and seek assistance locally. It's not that difficult to do , only a lot harder to explain. In the end there's nothing wrong with your MCP, it's a windows bug.

It is wise not to edit the registry, unless you are very computer literate :o
Just one thing puzzles me, is it not strange that it is happening on his other computers? Are they all Windows 7 based?

Yes the other is win 7 Based

Is there anything I can tell these guys at the computer shop? I already went there today to get it looked at but they said it wont work, I didn't believe him and thought you guys could help cause I really want it to work. Is there any software that will automatically fix the problem?

Regards

Clutching at straws now, but have you tried a different USB cable and ALL of the PC USB ports?

YES_______________________________________

Why not ask a friend who has an XP or vista machine if you can try the MCP on it?

Since this is also happening on other computers I suspect a windows update. You could try restoring your pc to a former date and see if that helps.
If you don't know how to do that, just google restoring windows 7, it's easy :-)

I dont know anyone with VISTA!:evil:

But it never worked in the first place, besides my windows automatic updates are disabled

In that case it's a VERY good idea to open your control panel, click on windows update and let Microsoft do it's stuff.
Could solve all your problems.

Quote:

---

Originally Posted by Henju

I dont know anyone with VISTA!:evil:

---

Only trying to help and give you options - will not bother anymore

Sorry, Just annoyed
My sincerest apologies, Have a nice evening Sir, Thankyou four your help

Ok I am doing the scan thingy now after a lot of self pep talk:?

Quote:

---

Originally Posted by Henju

Sorry, Just annoyed
My sincerest apologies, Have a nice evening Sir, Thankyou four your help

---

Ok, understand

Well the CMD has finished it's scan and says "did not find any integrity violations" Now what?:???:

No...:cry: It did not work... anything else. Open cockpits are not replying