Offsets

Hi guys!

Is there a list of offset settigs for fs2phidget?

Where I can find the offset variables?


Question from beginner of building!

Oerni

FS2P uses FSUIPC offsets. It is helpful to have a registered copy of it. The FSUIPC SDK has all of the offsets listed, and their attributes.

if there is one you need, I may be able to help.

Reid

Hi AK Mongo!

Thank you for your help!

I have a registered version of FSUIPC and I have allready FSUIPC_SDK but I cant find (or I am stupid) the offset for Fire estingush ENG1, Eng2 and APU and for the caution light (red flash) and Warning light (yellow flash).

For Info: I start to build the cockpit of learjet 45.

I can have a look around for you at the SDK, but you may have better luck checking on the official FSUIPC forum at fsuipc-support.

Pete does a good job answering questions like that, but please do a forum search first. He is a busy guy, and provides excellent support, but tires of answering questions he has already answered.

If you are not using a stock FS model plane, then there may not be an easy answer in the SDK and you may need to check with the plane's developer.

Reid

Hi Oerni,
This site may be of interest:
Hanger45.net they are all about Learjets.
Les

Hi @ all,

i search the offsets off Fire switch (Eng1 and 2, APU) and the batt Master switch (learjet45). I read FSUIPC_SDK but this offsets doesnt work. i found no solution in the WWW now i hope that someone here can help me.

Thanks a lot

Quote:

---

Originally Posted by Oerni

Hi @ all,

i search the offsets off Fire switch (Eng1 and 2, APU) and the batt Master switch (learjet45). I read FSUIPC_SDK but this offsets doesnt work. i found no solution in the WWW now i hope that someone here can help me.

Thanks a lot

---

Have you used the logging function of FSUIPC yet to try and capture the offset number? By activating logging and the monitor display you may be able to activate and or deactivate the features and see what, if any, offsets are being exchanged with FSUIPC.

Hi Tom,

yes I test the logging. I see the offset "0B51" and it changed from 1to 0 when i turn off/on APU.
But when I set the offset in the variable to 0b51 in fs2phidget4 the programm shows intern as offset! What that means?

Quote:

---

Originally Posted by Oerni

Hi Tom,

yes I test the logging. I see the offset "0B51" and it changed from 1to 0 when i turn off/on APU.
But when I set the offset in the variable to 0b51 in fs2phidget4 the programm shows intern as offset! What that means?

---

I'm not sure why that would show as an internal variable. Internal FS Variables do not read or update your flight simulator software, but they do store values like a regular FS Variable. You may want to edit the variable so that it's not set to internal.

HI!

I had buy a phidget 8/8/8 board!
Now i connect it to my PC! The fs2phidget programm shows the card an the movement but the offset (088C for throttle 1 at Learjet45) will not send to FSX! The logging from FSUIPC for 088C shows values by moving the throttle with mouse but there is no changing with the potentiometer from Phidget!

Can somebody help me?? I try some Offsets and ports but allway the same! the picture show my settings!

Attachment 6468

Have you deleted the throttle assignment in the fsx default screen?

yes, I did!

But I wonder that no analoge signal will be send to FSX!

Hello!

I want to use a potentiometer to control the throttles!
I use a phidget 8/8/8 board and offset 088C (for Eng1) but the value changed only in fs2phidget programm not in FSX!
I clear all other controls in FSX but it still not working.
The logging of FSUIPC changed only when I changed the throttle lever via mouse.
An other problem is that some Offsets changed to intern and I have no Idea why it happens?

The board must be okay because i can change the barometic Altitude with the poti!

Has anyone an Idea or solution to solve this problem? I have read many pages but there is no solution!

Thanks for answer

Oerni

Are you sure you have the correct offset? Some aftermarket aircraft may not use the stock offsets. You might want to log the offset you think you should use, move the throttle with the mouse and see what happens.

I set the FSUIPC Logging to 088C and move the throttle lever with the mouse and the value changed.
I set the FS2Phidget to offset 088C and move the potentiometer and the value on FS2Phidget changed, but nothing happend to offset in FSUIPC Logging.

Is there any way to find out what offset will be use for this Aircraft!? (Standard Learjet 45 of FSX)