İnstructor Station for JeeHell

Hi JeeHell and forum Guys

Many Thanks to JH for his fantastic software

I am sim engineer from Azerbaijan (full flight simulator engineer) now I trying to build Jeehell specified Instructor Station

which will be also able to perform some Quality tests (as Our full flight simulator ).

Those tests help sim to be certificated and to compare parameters to real aircraft

The IOS can be downloaded from link not fully functional yet

DOWNLOAD LINK:

http://bit.ly/1PEBwDN


Any helps will be appreciated

best regards

Hikmat

Hi Hikmat - this is a good start. Perhaps also implement a pause function as I believe the would be important before loading each state.

Also, the aircraft will need to be configured to the certain phase of flight when selecting approaches/takeoff, trimmed correctly, and throttle placed in the correct detent - can this be set with iOS?

it would also be good to be able to set the speed, altitude and heading of the aircraft.

Dear OmniAtlas ,

I am currently working on this (speed, trim and related parameters calculation during re-positions )

best regards

https://www.dropbox.com/s/u5rxzdbzx33air0/IOS.zip?dl=0

Added some functions such as re-positions to the 3 and the 7 mile.s All airports are available

and ground acceleration test has been added (After full power select run test button) will be added comparison data also

best regards

https://www.dropbox.com/s/u5rxzdbzx33air0/IOS.zip?dl=0


1. Added landing gear malfunctions,


2. Added engine fire, flameout malfunctions


3. Some internal bugs,


note: Only 3 miles, 7 miles, 12 miles repositions are available. r5 file shoul be in the same folder


with IOS.

"please select airport UBBB , runway 35" My sim is P3D v3 with the latest FSUIPC Version. But I can only select runway 34 or 36 in P3D. Which one should I use?

on runway 34 I get the follownig:
http://www.mycockpit.org/forums/atta...id=11209&stc=1

Then select 34 please , UBBB has no runway 36 any more, This is Azerbaijan airlines Airport, so try to select runway 34 from IOS not from P3D

regards

Hikmat

Quote:

---

Originally Posted by Hikmat

Then select 34 please , UBBB has no runway 36 any more, This is Azerbaijan airlines Airport, so try to select runway 34 from IOS not from P3D

regards

Hikmat

---

alright. I placed my aircraft on runway 34 and selected final 3nm. But still get the error I already posted...

where is IOS located?

just on my desktop. Should I run the application as admin?

it is ok. no needs admin rights. Could you tell me windows version?

Windows 10. Do you support that platform?

Quote:

---

Originally Posted by FSlikerX

Windows 10. Do you support that platform?

---

yes should work , lets do windows 7 compatibility mode (right click -properties -compatibility) see what happens. I will investigate reasons

best regards

Quote:

---

Originally Posted by Hikmat

yes should work , lets do windows 7 compatibility mode (right click -properties -compatibility) see what happens. I will investigate reasons

best regards

---

okay I am sorry but the same error.
Any other ideas?

[QUOTE=FSlikerX;161526]okay I am sorry but the same error.
Any other ideas?[/QUOTE

will investigate it , after finding issue I will post

[QUOTE=Hikmat;161527]

Quote:

---

Originally Posted by FSlikerX

okay I am sorry but the same error.
Any other ideas?[/QUOTE

will investigate it , after finding issue I will post

---

Okay thanks for your support

[QUOTE=FSlikerX;161529]

Quote:

---

Originally Posted by Hikmat

Okay thanks for your support

---

Dear Fsliker,

Finally I found issue, try this link to download fixed version: https://www.dropbox.com/s/u5rxzdbzx33air0/IOS.zip?dl=0

let me know if it works

best regards

Hikmat

[QUOTE=Hikmat;161538]

Quote:

---

Originally Posted by FSlikerX

Dear Fsliker,

Finally I found issue, try this link to download fixed version: https://www.dropbox.com/s/u5rxzdbzx33air0/IOS.zip?dl=0

let me know if it works

best regards

Hikmat

---

Hey,

thank you! It works fine

Hey Hikmat,

how did you get the gear malfunctions for individual gears working?
Are that FSUIPC offsets or so? Can you explain that technically? :)

Thanks,
Martin

Quote:

---

Originally Posted by Maddin91

Hey Hikmat,

how did you get the gear malfunctions for individual gears working?
Are that FSUIPC offsets or so? Can you explain that technically? :)

Thanks,
Martin

---

Hi Martin

Yes there are offsets for it, look at landing gear offset in FSUIPC documentation

best regards

Hikmat

Hi Hikmat,

Thanks for your IOS. I am wondering can your software run from Client computers?

Quote:

---

Originally Posted by masterp

Hi Hikmat,

Thanks for your IOS. I am wondering can your software run from Client computers?

---

Dear masterp

yes you can just use wideFs

best regards

Hikmat

Great Thanks Hikmat, looking forward for more function from your IOS :D
"Hello" message shown on some button haha, hello !!
Cheers,

Hello everyone,
Finally I decided to sell the source code of instructor station for the future devolopment. If anyone interested please let me know