A320 FMGS B50

Quote:

---

Originally Posted by asessa

Hi, happy new year to all forumers.
Yesterday i had a fast test of B50 and i noted the AUTOLAND LIGHT on glearshield it's always light on (blinking).

It occurs only if i have the FO Efis connected

Any idea?
Regards

---

Up... JL can you help me ?

I'll try to have a look

Hi,

I use ISIS as standby gauge. Is there a possibility to synchronize ISIS' BARO REF? 1013 is constantly displayed no matter what is set in Baro Window.
Great if anybody has got an idea!
Best regards

Quote:

---

Originally Posted by romeow

Hi,

I use ISIS as standby gauge. Is there a possibility to synchronize ISIS' BARO REF? 1013 is constantly displayed no matter what is set in Baro Window.
Great if anybody has got an idea!
Best regards

---

This file is located in the FMGS Server\PERF\CFM and FMGS Server\PERF\IAE folders. You can use it to adapt your aircraft to the FMGS software.


LinkISISQNHtoCPT=no.

change to


LinkISISQNHtoCPT=Yes .

Quote:

---

Originally Posted by startrail

This file is located in the FMGS Server\PERF\CFM and FMGS Server\PERF\IAE folders. You can use it to adapt your aircraft to the FMGS software.


LinkISISQNHtoCPT=no.

change to


LinkISISQNHtoCPT=Yes .

---

Pefect! Thank you very much indeed.

Hi,

I tried to work with the PilotRoute function within FMGS, but it seems that I keep struggling. This is what I have done:

1 - Entered a route manually in MDCU (from EDDW to EDDF, with runways, SID, STAR and all waypoints entered via airways)
2 - Saved that route as pilot route (name=EDDWEDDF)
3 - Next day loaded EDDWEDDF route via INIT page
4 - Obviously on FLIGHTPLAN page it only shows origin airport, origin runway, SID and destination airport. All waypoints in between are missing as well as destination runway and STAR.

This is what the CORTE file is looking like (which in my opinion looks good):

Quote:

---

<CORTEs>
<CORTE ID="EDDWEDDF" TYPE="PILRTE" FROM="EDDW" TO="EDDF" FLTNBR="NONE" CI="NONE" CRZFL="NONE"><DEPARTURE RWY="09" SID="ERLA3Q" TRANS="NO TRANS"/><LEG SEQ="0" TYPE="AWY" ID="Y804" WPT="PIROT"/><LEG SEQ="1" TYPE="AWY" ID="T152" WPT="KERAX"/><ARRIVAL TRANS="NO TRANS" STAR="KERA2M" VIA="TAU" APPR="ILS07LY"/><ALTN ICAO="EDDK" ID="NONE"/></CORTE>
</CORTEs>

---

Anyone any idea?

Thanks
Stefan

Hello Stefan,
why to you not use the courteManger from CaptnPero?

https://aviation.pero-online.de/wordpress/?page_id=1725

regards Peter

Quote:

---

Originally Posted by pete_fuss

Hello Stefan,
why to you not use the courteManger from CaptnPero?
https://aviation.pero-online.de/wordpress/?page_id=1725

---

Thanks, have not seen that tool before. Looks great, I think I will use that one.

Stefan

Hallo Stefan,

have also a look to the JeeHell EXT PWR by GSX !

https://aviation.pero-online.de/wordpress/?page_id=1937

regards Peter

Yes, that's great - I am using that already :)

Hi everybody,

again a question from my part. I've installed a WXR Panel which ist connected via FMGS Config > Joystick Buttons. It really works fine. But there is only one tiny issue which is a bit annoying.

As usual, WXR is switched off during taxi to gate. When I shut down FMGS with WXR switched OFF and I restart FMGS, WXR is automatically activated again (displayed on ND). Is there a way to start FMGS with WXR off?

Kind regards
René

Quote:

---

Originally Posted by romeow

Hi everybody,

again a question from my part. I've installed a WXR Panel which ist connected via FMGS Config > Joystick Buttons. It really works fine. But there is only one tiny issue which is a bit annoying.

As usual, WXR is switched off during taxi to gate. When I shut down FMGS with WXR switched OFF and I restart FMGS, WXR is automatically activated again (displayed on ND). Is there a way to start FMGS with WXR off?

Kind regards
René

---

Hi René,
How do you assign action to turn off the WXR.? I tried both Push/ Release action in FMGS_Config, but it can not turn off the WXR. the only way to turn off WXR is inside MCDU.

Hi,

Hardware sided: WXR panel with a switch at SYS (OFF and ON)

In FMGS: Button Push Action = WXR SYS1 with Push Event
Button Release Action = WXR SYS1 with Release Event

If it doesn't work then have a look at Windows Controller Settings > appropriated Gamecontroller > Properties and watch if the switch works properly.

Hi.

Who knows why these values? They are out of scale.


Thank you!


http://www.mycockpit.org/forums/atta...id=12916&stc=1

Hi guys, i've a problem , i can't see any wx information on radar.
This is my config:

pc1 with FMGS Server + ASP4 , win 10 64bit
pc2 with cockpit gauges (PFD,ND etc) , win 64bit

from pc2 windows exporer i can access to pc1 shared dir, so i can acces to wxr shared dir on server (\\a320p3d\wxr)

any idea?

Quote:

---

Originally Posted by asessa

Hi guys, i've a problem , i can't see any wx information on radar.
This is my config:

pc1 with FMGS Server + ASP4 , win 10 64bit
pc2 with cockpit gauges (PFD,ND etc) , win 64bit

from pc2 windows exporer i can access to pc1 shared dir, so i can acces to wxr shared dir on server (\\a320p3d\wxr)

any idea?

---

Hi,
Make sure you have Simpatcher loaded into the sim./ double check in dll or in-sim menu

Quote:

---

Originally Posted by masterp

Hi,
Make sure you have Simpatcher loaded into the sim./ double check in dll or in-sim menu

---

Uhm ok, i will check it, thanks

I checked it and i don't have simpatcher loaded in addon menu of p3d.
I found simpatcher.dll in the A320FMGS B50\SimPatch directory.

How can i activate this module?

Try to reinstall and select the proper FS version or look for a guide on how to enable a module for your FS version.

Hi, i have simpatcher loaded now (i can see it into addon list of the sim) but radar doesn't work yet :(

Any other idea ?

Quote:

---

Originally Posted by asessa

Hi, i have simpatcher loaded now (i can see it into addon list of the sim) but radar doesn't work yet :(

Any other idea ?

---

Ciao asessa,

Does AS run in real time mode? Does the wx file generated continuously in the shared wx folder? Have you config the NDs link to the shared wx folder? (can be check the EIS\ND.ini file if having the correct path WXRadarPath=\\a320p3d\wxr)
And try to park the aircraft at the place where having the bad weather to check.? If the map inside Active sky has CB then you will have those CBs in Nav Display too.

Quote:

---

Originally Posted by masterp

Ciao asessa,

Does AS run in real time mode? Does the wx file generated continuously in the shared wx folder? Have you config the NDs link to the shared wx folder? (can be check the EIS\ND.ini file if having the correct path WXRadarPath=\\a320p3d\wxr)
And try to park the aircraft at the place where having the bad weather to check.? If the map inside Active sky has CB then you will have those CBs in Nav Display too.

---

Hi @masterp , yes ASP4 is in real mode.
The weather data into shared folder were update as well. I didn't check if eid.ini was right but if i run configuration.exe the path was right.

In any case , i will check all again.

Thanks

Hi
Does anyone know if we could set WXR/TERR DIM in MCDU MENU a value other than 256 by default?
Regards

Create a file called WXRTERR.cfg in FMGS Server folder. Inside you have to paste the following:
[dim]
dim=120

Quote:

---

Originally Posted by jeehell

Create a file called WXRTERR.cfg in FMGS Server folder. Inside you have to paste the following:
[dim]
dim=120

---

Is there a similar way to set WXR (in MCDU MENU / WXR SETTINGS) to OFF by default (instead of ON) ?
Thanks!

yep there is, create the file WXRoff.cfg
you can also create the file WXRmanual.cfg to have the WXR in manual mode (some WXR panels do not have auto modes).

Hi;


Is it possible to upload wind data directly from Active Sky To MCDU.


Thanks.

Quote:

---

Originally Posted by startrail

Hi;


Is it possible to upload wind data directly from Active Sky To MCDU.


Thanks.

---

No it is not possible
JL

Quote:

---

Originally Posted by jeehell

yep there is, create the file WXRoff.cfg
you can also create the file WXRmanual.cfg to have the WXR in manual mode (some WXR panels do not have auto modes).

---

Thank you! I'll try it out soon.
Kind Regards

Hi JL,
perfect, it works! Thanks again for your support!

René

Hello Guys:)
i bougth the FSL soundpack. how i install it? simply paste engine souds in sound folder? or do like readme file says? paste the fsl souds folder //user/documents/prepard 3d v4 addon/fsl ?
anyone can help me?
regards
Fred

Hi
I think if you pull from NAV to HDG mode then the magenta D sign should become white, wich means APP mode must be entered manually, shouldn't it?

Hi JL, i just had this error (simulator and FGMS both freezed)
Sorry bu my SO is italian..

Quote:

---

Nome dell'applicazione che ha generato l'errore: FMGS_Server.exe, versione: 0.50.2.6, timestamp: 0x5b229e54
Nome del modulo che ha generato l'errore: unknown, versione: 0.0.0.0, timestamp: 0x00000000
Codice eccezione: 0xc00000fd
Offset errore 0x81a5754d
ID processo che ha generato l'errore: 0x154c
Ora di avvio dell'applicazione che ha generato l'errore: 0x01d4e34d23940aba
Percorso dell'applicazione che ha generato l'errore: G:\A320FMGS B50\FMGS Server\FMGS_Server.exe
Percorso del modulo che ha generato l'errore: unknown
ID segnalazione: ba559172-039b-4ce2-a99f-8c6203807ebf
Nome completo pacchetto che ha generato l'errore:
ID applicazione relativo al pacchetto che ha generato l'errore:

---

Quote:

---

Bucket errato , tipo 0Nome evento: APPCRASH
Risposta: Non disponibile
ID CAB: 0


Firma problema:
P1: FMGS_Server.exe
P2: 0.50.2.6
P3: 5b229e54
P4: GTII-OSD.dll
P5: 2.0.4.2
P6: 5c6371a5
P7: c0000005
P8: 0000ba93
P9:
P10:

---

What was happened?

Quote:

---

Originally Posted by Phpilot

Hello Guys:)
i bougth the FSL soundpack. how i install it? simply paste engine souds in sound folder? or do like readme file says? paste the fsl souds folder //user/documents/prepard 3d v4 addon/fsl ?
anyone can help me?
regards
Fred

---

hi Fred, could you already figure out?
I listened to the sample sound files. And I think, I want to have this too. But would be good to know, if this is working with JL?

Thanks,
Michael

Hi , yesterday i had another flight without WX radar running :(
I tried to map a network disk to the shared folder and i configured it by configuration.exe, but i had no WX on my ND again
In the shared folder the WX files was update continually as well.


Can someone help me about this problem ? Does FGMS have a log for the WX or general to check ?

Mapped fodler are not necessarily a good idea because depending on user rights/permissions (even with admin rights there are sandboxing features so it's not always working) the mapped drive is not visible by an application. it really is better to have it as shared folder (right click, share with/give access to -> specific persons -> everyone read/write rights, also in sharing options make sure the password is disabled, workind may differ in english and other languages...)

Quote:

---

Originally Posted by jeehell

Mapped fodler are not necessarily a good idea because depending on user rights/permissions (even with admin rights there are sandboxing features so it's not always working) the mapped drive is not visible by an application. it really is better to have it as shared folder (right click, share with/give access to -> specific persons -> everyone read/write rights, also in sharing options make sure the password is disabled, workind may differ in english and other languages...)

---

Hi JL, ok, but i had shared folder until now and no wx displayed on ND.
This is my config :

Main Pc : P3D , ASp4, FGMS Server, Overhead, MCDU and all HW . I shared the folder WXR under FGMS B50.2 main folde (\\a320p3d\wxr\ for everyone in R\W). On W10 i disabled "shared with password".
I'm sure the wxr folder was update with weather data

Slave Pc : All mip views , WideFGMS setted and running. Into FGMS configuration i had \\a320p3d\wxr\ .

Any idea ?

Are you sure you do not have TERR ON ND on?
What type of weather do you fly in? You need rain/snow, just clouds are not enough.
Make sure you have gain and tilt on auto.

Quote:

---

Originally Posted by jeehell

Are you sure you do not have TERR ON ND on?
What type of weather do you fly in? You need rain/snow, just clouds are not enough.
Make sure you have gain and tilt on auto.

---

TERR ON ND i had off, but i'll check that in next flight
With all type (rain, snow, storm...) no wxr displayed
Gain and Tilt was on auto

Thank you for the assistance

Quote:

---

Originally Posted by asessa

Hi JL, ok, but i had shared folder until now and no wx displayed on ND.
This is my config :
Main Pc : P3D , ASp4, FGMS Server, Overhead, MCDU and all HW . I shared the folder WXR under FGMS B50.2 main folde (\\a320p3d\wxr\ for everyone in R\W). On W10 i disabled "shared with password".
I'm sure the wxr folder was update with weather data
Slave Pc : All mip views , WideFGMS setted and running. Into FGMS configuration i had \\a320p3d\wxr\ .
Any idea ?

---

Every share resource has a name that be seen from others on LAN. In your case the share folder is: C:\a320p3d\wxr\, not that you said. Right?
Now suppose the share name you've choosen for this recource is: WEATHER

In your slave PC the configuration must be: \\192.168.1.1\WEATHER, if 192.168.1.1 is your server IP address. You could use also machine name instead of IP.
Try it with read/write rights.
Regards