Leonidas please try this version of the EHID driver then report if you still get this issue:
http://www.jeehell.org/EHIDmodule.dll
JL
Printable View
Leonidas please try this version of the EHID driver then report if you still get this issue:
http://www.jeehell.org/EHIDmodule.dll
JL
Hi!
I still have an issue with the ND. It shows the flightplan in a strange way.
Attachment 8367
I'm running ND and PFD on a client PC. I copied the Navdata files as well. Other WPTs, VORs, etc. are shown correctly.
Any idea or hint what I'm doing wrong?
Thanks for help!
Christian
Hi,
When this happens, you can try to do the following:
- close FMGS Server and ND
- go to task manager-> services tab
- look for FMGSnavDB service and do right click->stop then right click ->start.
-Run server and NDs again.
Regards,
JL
Hi JL!
It's magic. It's working now.
I hope I won't have to do this procedure all the time when I booted my PCs?
Thanks for quick help!
Christian
Hi JL,
may I ask what you've added in 31.1? Could you solve the phantom waypoint issue on the NDs?
I got a general question about NAV and auto tuning. After a regular cold and dark start up, the ACFT tunes the VORs automatically. Now imagine you want to tune manually, so you punch in your desired frequency, fine.... but how do you now reset it to autotuning? I heard something about adding a "M" in the frequency for "Manual" tuning? How did you implement it?
And have you touched the pitch down during flare?
B31... is real nice & smooth.
Thumbs up!
Robert
@ ALL: Is anybody using the new VGA MCDU from Flight Deck Solutions with this great A320 software? If so, please get in touch with me...
robert,
to reset autotune just push CLR key on MCDU the LSK next to the manually tuned vor....and the magic happens :-)
regards
fil
Hi Robert,
The 31.1 is jsut a few tiny bugs correction, nothing big.
Regards,
JL
It's OK now with the red message, but Cockpitsonic's ECAM CP doesn't work properly. You can push just the ALL button and the lower ECAM shows all screens one by one every 1 sec, but you can't stop it until the end of the flight. Also, the LEDs don't turn on.
Regards
Hi,
@Leonidas: please download this one: http://www.jeehell.org/EHIDmodule.dll it should correct the ALL button issue.
As for the buttons LEDs, if I remember correctly we never had this one settled down. I'll contact you by mail.
@Startrail: if you use FScockpit drivers, you need to tell them that there is an issue with their driver. Their driver does not send the "button released" action, which blocks the TO CONF button in the DOWN position, and so you will always get this message.
Regards,
JL