Printable View
I start to only FS Sim then FMGS and then client 1 and client 2
Fs Cockpit.eu Instrumende (modules) have a starter on any PC where windows are installed in FMGS. I see if the modules are connegdet properly, and be green in the window, in red, it is not connegdet.
regards rigo
Speed pad works in every situation.
Hi Jl/guys,
after a fresh installation of version 32.3 I got an issue with the output of the auto brake panel. Every time if i put the xfeed on, the medium auto brake korry illuminates. Also it's doesn't work (illuminating) when I push one of these three korrys. The brk/fan korry is also all time on. I assigned all outputs for the korrys via the sioc creator and an opencockpits output card.
Here is a short video of the issue: http://youtu.be/SMjlJQM1Ly0
by the way: thx for your help guys, with the flaps lever issue! ;) works fine now! But I hear every time the moving sound of the flaps?!?!?
Regards Florian
Hi JL -- any plans to implement a TOC puckstick?
Best regards.
Hi,
@Tcane: you MUST update with the online updater to fix the hardware LEDs issue. It may also fix the Flaps sounds one.
@Ben: yes at some point. I plan to implement all normal features of the FMGS...
Regards,
JL
Hi JL, i just downloaded latest update.
I test it but there are some problems :
1. SD is not showed, it run but it is always black
2. EWD is showed but the luminosity is too low and i can't managed it from my ECAM Panel (Cockptisonic)
3. ECAM Logic don't start , i need to start it manually
4. ND is showed only with TCAS mode STBY, in MODE C it's not showed
5. CockpitSonic ECAM Panel don't work (before this update yes) . It also is related to point 2
6. CockpitSonic FCU and RMP work but without backlight on (they don't work from B31 , b30 works)
Some picture of modules :
That´s strange...Quote:
Originally Posted by jeehell
I´m sure that I did the update. It would then make no more update. After a new installation incl. updates everything works fine again. Thanks.
Hello everybody,i'm new here at mycockpit; my name is marcello and i come from a little town near venice.
My biggest thanks goes to JL for the incredible and awesome job done on this suite; after a month of testing i can say that it is rock solid and smooth (no lag, no error,only some minor issues). Talking about minor issues i'm experiencing something weird about the Pa engine: they are or maybe for some errors on my setup they looks to me quite overrated; even taking off with correct flex t. and max weight and no wind the speed goes up very quickly and ,after airborne i need to pull up 20 to 25 degrees (pitch) to maintain v2+20; also the entire climb stage is very very quick compared to other products I've tried in the past ( i'm not saying other products like airbus x ext are more precise or correct).
Second thing the autothrottle in cruise stage, it seems like it is a bit "nervous" , the attitude of trying to maintain strictly the assigned speed makes n1 goes up and down intermittent within seconds. Example 80%-73% 79%-70%...and last thing, in the ils approach sometimes the ap is unable to intercept the localizer making wide left and right turn trying to intercept it instead of smooth and "light" turn.
Well, sorry for my bad english, i hope everybody could understand and maybe give some hint to correct some parameters or share other experiences with this great software suite.
Marcello F.
Hi
@Asessa: this is strange. I do not have any issue with ECAM Logic not starting with the starter. When was the last time you installed a complete package (NOT using the auto updater)?
Also it seems you do not run the correct EIS application for EWD and SD.
With latest versions, the following files do not exist anymore: PFD.exe, ND.exe, EWD.exe, SD.exe (and their FO counterpart as well). They are ALL replaced by a single EIS.exe which is run with specific parameters by the starter OR by the shortcuts found in EIS folder. Are you sure you're launching the correct applications (or suing the latest starter application)? even if the old PFD,ND, etc... are still present on your computer, you msut not use them anymore, the installer cannot delete them...
@Marcello: the PA model is one of the most accurate. We compared the performance with real world data for the A320-200 and the difference is not that big.
The ATHR is indeed a bit nervous, I'll work on that later.
The ILS however works almost perfectly since B32 versions I think, there is only a very slight overshoot sometimes (and by slight, it means less than 0.5°...), so unless you arm LOC/APPR mode too late, this is strange...
Regards,
JL
Ok. I installed a full package at B32.1 , if i remember well.Quote:
Originally Posted by jeehell
In anycase , i will install a full package now, can you give me correct link ?
How can i backup my settings (buttons, axis etc etc) ?
The latest link is http://www.jeehell.org/A320FMGS_B32.3.exe
it is required to make an auto update just after installing it, especially since you use hardware.
To backup buttons,axis etc, you jsut need to copy the files which look like configuration files (usually with .cfg or .ini extensions) in FMGS Server and Hardware Moduels folders.
Regards,
JL