Printable View
Hi guys again.
After consulting with JL, we came to the point that issues are related to missing dual state of buttons which should be defined for each button.
I will add both events UP and DOWN to each ECAM buttons. Today I will do changes and will test tomorrow morning. Then once all is working back I will publish new Profiler version.
Stay tuned, some news around mid day tomorrow.
Regards, Marcin
Hi all -- is reprogramming the FROM/TO page on the init section of the MCDU a big 'no no' when in the air?
When this is done it the whole system resets with FMGS -- is this what happens in the real world systems, or is there a fail safe option?
What is the best way to program in an alternative destination while in the air (e.g. if there is an emergency, and your list of destination is not in the alternative airport page, and you need to do an immediate landing).
Weird... I've reinstalled B.40.1 without success! What else could I try?Quote:
Originally Posted by jeehell
ben the alternate is always present in the flight plan and inserted when programming the route (altn field in init a page).
should u divert to a different alternate while enroute (emergency) best way is making a LAT REVISION of the next waypoint and inserting the alternate icao in the NEW DEST field from there.
cheers
fil
Ok guys, looks like we have ECAM issue fixed. In 15-30 minutes I will publish new version of SkalarkiIO Profiler which will be available through autoupdater version or by direct download from this link. Latest build will be "4.3.3105.1000". Actually there will be only change in JLFMGS. Release notes can be found here.
What was changed?
I have added/changed events for each ECAM button. Now each button needs two actions DOWN and UP defined. Users with P&P ECAM as well as users with older version of hardware (non P&P) needs to use Edit Profile feature and appy changes to all ECAM buttons.
http://www.mycockpit.org/forums/atta...id=10283&stc=1
For P&P hardware ONLY! - It is possible as well to replace piece of .xml file. Please find all ECAM related switches inside .xml file and replace with this:
Please report behaviour after upgrade.Code:<switch name="[ECAM] ALL" group="ECAM" device="ECAM" index="22" actAsPushbutton="False">
<on module="FSX JEEHELLAirbus" function="[PEDESTAL] - ECAM ALL DOWN" />
<off module="FSX JEEHELLAirbus" function="[PEDESTAL] - ECAM ALL UP" />
</switch>
<switch name="[ECAM] APU" group="ECAM" device="ECAM" index="36" actAsPushbutton="False">
<on module="FSX JEEHELLAirbus" function="[PEDESTAL] - ECAM APU DOWN" />
<off module="FSX JEEHELLAirbus" function="[PEDESTAL] - ECAM APU UP" />
</switch>
<switch name="[ECAM] BLEED" group="ECAM" device="ECAM" index="33" actAsPushbutton="False">
<on module="FSX JEEHELLAirbus" function="[PEDESTAL] - ECAM BLEED DOWN" />
<off module="FSX JEEHELLAirbus" function="[PEDESTAL] - ECAM BLEED UP" />
</switch>
<switch name="[ECAM] CLR1" group="ECAM" device="ECAM" index="35" actAsPushbutton="False">
<on module="FSX JEEHELLAirbus" function="[PEDESTAL] - ECAM CLR DOWN" />
<off module="FSX JEEHELLAirbus" function="[PEDESTAL] - ECAM CLR UP" />
</switch>
<switch name="[ECAM] CLR2" group="ECAM" device="ECAM" index="23" actAsPushbutton="False">
<on module="FSX JEEHELLAirbus" function="[PEDESTAL] - ECAM CLR DOWN" />
<off module="FSX JEEHELLAirbus" function="[PEDESTAL] - ECAM CLR UP" />
</switch>
<switch name="[ECAM] COND" group="ECAM" device="ECAM" index="34" actAsPushbutton="False">
<on module="FSX JEEHELLAirbus" function="[PEDESTAL] - ECAM COND DOWN" />
<off module="FSX JEEHELLAirbus" function="[PEDESTAL] - ECAM COND UP" />
</switch>
<switch name="[ECAM] DOOR" group="ECAM" device="ECAM" index="25" actAsPushbutton="False">
<on module="FSX JEEHELLAirbus" function="[PEDESTAL] - ECAM DOOR DOWN" />
<off module="FSX JEEHELLAirbus" function="[PEDESTAL] - ECAM DOOR UP" />
</switch>
<switch name="[ECAM] ELEC" group="ECAM" device="ECAM" index="29" actAsPushbutton="False">
<on module="FSX JEEHELLAirbus" function="[PEDESTAL] - ECAM ELEC DOWN" />
<off module="FSX JEEHELLAirbus" function="[PEDESTAL] - ECAM ELEC UP" />
</switch>
<switch name="[ECAM] ENG" group="ECAM" device="ECAM" index="37" actAsPushbutton="False">
<on module="FSX JEEHELLAirbus" function="[PEDESTAL] - ECAM ENG DOWN" />
<off module="FSX JEEHELLAirbus" function="[PEDESTAL] - ECAM ENG UP" />
</switch>
<switch name="[ECAM] F/CTL" group="ECAM" device="ECAM" index="30" actAsPushbutton="False">
<on module="FSX JEEHELLAirbus" function="[PEDESTAL] - ECAM F/CTL DOWN" />
<off module="FSX JEEHELLAirbus" function="[PEDESTAL] - ECAM F/CTL UP" />
</switch>
<switch name="[ECAM] FUEL" group="ECAM" device="ECAM" index="21" actAsPushbutton="False">
<on module="FSX JEEHELLAirbus" function="[PEDESTAL] - ECAM FUEL DOWN" />
<off module="FSX JEEHELLAirbus" function="[PEDESTAL] - ECAM FUEL UP" />
</switch>
<switch name="[ECAM] HYD" group="ECAM" device="ECAM" index="31" actAsPushbutton="False">
<on module="FSX JEEHELLAirbus" function="[PEDESTAL] - ECAM HYD DOWN" />
<off module="FSX JEEHELLAirbus" function="[PEDESTAL] - ECAM HYD UP" />
</switch>
<switch name="[ECAM] PRESS" group="ECAM" device="ECAM" index="24" actAsPushbutton="False">
<on module="FSX JEEHELLAirbus" function="[PEDESTAL] - ECAM CAB PRESS DOWN" />
<off module="FSX JEEHELLAirbus" function="[PEDESTAL] - ECAM CAB PRESS UP" />
</switch>
<switch name="[ECAM] RCL" group="ECAM" device="ECAM" index="27" actAsPushbutton="False">
<on module="FSX JEEHELLAirbus" function="[PEDESTAL] - ECAM RCL DOWN" />
<off module="FSX JEEHELLAirbus" function="[PEDESTAL] - ECAM RCL UP" />
</switch>
<switch name="[ECAM] STS" group="ECAM" device="ECAM" index="26" actAsPushbutton="False">
<on module="FSX JEEHELLAirbus" function="[PEDESTAL] - ECAM STS DOWN" />
<off module="FSX JEEHELLAirbus" function="[PEDESTAL] - ECAM STS UP" />
</switch>
<switch name="[ECAM] T.O CONFIG" group="ECAM" device="ECAM" index="32" actAsPushbutton="False">
<on module="FSX JEEHELLAirbus" function="[PEDESTAL] - ECAM TO CONFIG DOWN" />
<off module="FSX JEEHELLAirbus" function="[PEDESTAL] - ECAM TO CONFIG UP" />
</switch>
<switch name="[ECAM] WHEEL" group="ECAM" device="ECAM" index="28" actAsPushbutton="False">
<on module="FSX JEEHELLAirbus" function="[PEDESTAL] - ECAM WHEEL DOWN" />
<off module="FSX JEEHELLAirbus" function="[PEDESTAL] - ECAM WHEEL UP" />
</switch>
Hallo Marcin,
Just installed the new Profiler and fixed-up the .xml file. On the ground all seems to be working fine. I'll make a flight later on.
Thanks for the expedient support.
Best regards,
--pim
thx for your support both JL and MARCIN.
sorry for my bad memory about up & down events...programmed it years ago :) didn't remember only few buttons had both events in the older version!
thx again
fil
Thank you Fil, using the lateral revision seems to have done the trick :)Quote:
Originally Posted by filippoporcari
Regards.
always welcome sir! :)
fil
Hello,
in my configuration i use FSUIPC Offsets to Change the ECAM Pages and i have the same issues. I can only set the Engine Page with Offset 78ED, Value 5. The other Values doesn´t work anymore...
Any Ideas??
Greetings
Joe