PoKeys USB Interface

Thanks Ian,

You can use the analog inputs, I'm using these to dim the displays. And it is correct with ProSim you don't need to use the configuration software just plug it in the Flightsim PC, enable the PoKeys cards on the hardware tab and you are ready and ProSim takes care of every input or output you select.

You only need the configuration software when you want to do special things are use it like a normal joystick controller.

If you have questions, just ask.


Regards, Wendy

Quote:

---

Originally Posted by metamarty

Yes, ProSim supports the analog inputs. ProSim will also do the configuration for you, so you should not need to use any PoKeys software configuration tools. Just select the pins you want to use in the ProSim configuration, and the card will be configured for you, including analog inputs.

---

thanks marty......
didn't get that far yet. btw, i am so impressed with this software. and for Wendy 'If you have questions, just ask.' :o trust me, i will.
rgds

ian

Thanks :p

We will continue to improve, so there's more on the way :D

US Distributor is ......


But I ordered mine from Wendy because postal services are fast to the US and she has helped to advance our hobby
Luis

Thanks Luis,

It will leave this morning. I have sent a confirmation to your mailaddress.

Here is a simple lua script I created for the PoKeys55T device that turns three landing gear LED's on and off using lua events.

Hope this information is useful.

Terry

Thanks Terry, did'nt know that you could make a connection via PoKeys with Lua script.

Very nice, do you mind if I put it in on my website giving credit to you ?

Regards, Wendy

Quote:

---

Originally Posted by Wendy

Thanks Terry, did'nt know that you could make a connection via PoKeys with Lua script.

Very nice, do you mind if I put it in on my website giving credit to you ?

Regards, Wendy

---

Wndy,

You are more than welcome to post this info to your web site. Credit is not required. Just happy to be able to share with others.

Terry

Much appreciated, thanks for sharing.


Regards, Wendy

Wendy,

I have a couple of POKeys55 cards that I bought from you to use with ProSim and am really pleased with the results. Do you know if it is possible to connect a servo (for say the flaps guage) directly to the card or is it necessary to have a separate servo controller card for this job.

Thank you,

Philip