A320 FMGS beta 26

Printable View

Show 40 post(s) from this thread on one page

10-02-2011, 07:31 AM
Fritz

Re: A320 FMGS beta 22

Quote:

Originally Posted by Emmegi

Hi all,
first test with B22 version trying ...

I have the problem when I start in FLX mode, the Aircraft rises steeply a bit after takeoff.
In the previous version it was even worse. Has become much better in the new version.
When I activate the autopilot about 1000 ft the vertical speed is 6400 +.
The autothrottle in FLX mode react sluggishly. I quickly reached the speedlimit of flaps 1.
Until now I have also not hit the glide path. But may I have something not configured correctly. ILS Frequenzy:?:

Quote:

Originally Posted by jules744

Thanks For reply,
I have just a small problem with the autobrake it dosen't works in landing ...

The problem with the autobrake I cannot confirm. It works well.
10-02-2011, 07:54 AM
jules744

Re: A320 FMGS beta 22

Quote:

Originally Posted by Fritz

I have the problem when I start in FLX mode, the Aircraft rises steeply a bit after takeoff.
In the previous version it was even worse. Has become much better in the new version.
When I activate the autopilot about 1000 ft the vertical speed is 6400 +.
The autothrottle in FLX mode react sluggishly. I quickly reached the speedlimit of flaps 1.
Until now I have also not hit the glide path. But may I have something not configured correctly. ILS Frequenzy:?:

The problem with the autobrake I cannot confirm. It works well.

Ok great to heard this :-)

Do you have any idea of the source of my problem ?
regards

Jules,
10-02-2011, 08:49 AM
Emmegi

Re: A320 FMGS beta 22

Hi Fritz,
just a couple of questions: 1) what version of FSUIPC do you use? 4.7 version is not compatible (perhaps you already know this). 2) did you disable joystick assignment in the settings control axes tab? (if you use FSX).

Regards

MG
10-02-2011, 10:32 AM
jules744

Re: A320 FMGS beta 22

Hi,
I have always Violation Acess , and many popup opened .And all gauges are freeze

please help

Thank you

Best Regards,

Jules
10-02-2011, 10:59 AM
jules744

Re: A320 FMGS beta 22

Hi,
I have always Violation Acess , and many popup opened .And all gauges are freeze

please help

Thank you

Best Regards,

EDIT/

Nom de l’application défaillante OVHD.exe, version : 1.0.0.0, horodatage : 0x4e7c505b
Nom du module défaillant : SimAPI_FS.dll_unloaded, version : 0.0.0.0, horodatage : 0x4e7c511d
Code d’exception : 0xc000001d
Décalage d’erreur : 0x04c767f0
ID du processus défaillant : 0x1374
Heure de début de l’application défaillante : 0x01cc80fa99107caa
Chemin d’accès de l’application défaillante : C:\Airbus A320\A320FMGS\OVHD\OVHD.exe
Chemin d’accès du module défaillant: SimAPI_FS.dll
ID de rapport : 6760d168-ecfa-11e0-9ff4-90e6ba4a8ab2
10-02-2011, 11:09 AM
Fritz

Re: A320 FMGS beta 22

Quote:

Originally Posted by Emmegi

Hi Fritz,
just a couple of questions:...

Yes I know that FSUIPC 4.7 is not copatible yet and
yes too I have disabled all joystick assignment in the settings of FSX and also in FSUIPC.

I only pull the joystick at VR Speed to take off.
For the first moment the climb angle is still ok, but then the plane rises a little too steep.

Quote:

Originally Posted by jules744

Ok great to heard this :-)...

I guess it depends with the Arcraft dynamics. I used in the PA Airbus.
As already mentioned, compared to the previous version it is much better now.
I had always a stall after take-off in the previous version.

Quote:

Originally Posted by jules744

Hi,
I have always Violation Acess...

To your problem Jules, if you have used the FMGS_Config.exe the program it is still active when you have closed it. You must quit the program again in the Windows Task Manager or you get the I/O error.
10-02-2011, 11:27 AM
jules744

Re: A320 FMGS beta 22

Quote:

Originally Posted by Fritz

Yes I know that FSUIPC 4.7 is not copatible yet and
yes too I have disabled all joystick assignment in the settings of FSX and also in FSUIPC.

I only pull the joystick at VR Speed to take off.
For the first moment the climb angle is still ok, but then the plane rises a little too steep.

I guess it depends with the Arcraft dynamics. I used in the PA Airbus.
As already mentioned, compared to the previous version it is much better now.
I had always a stall after take-off in the previous version.

To your problem Jules, if you have used the FMGS_Config.exe the program it is still active when you have closed it. You must quit the program again in the Windows Task Manager or you get the I/O error.

Thanks for you reply I 'll try it .
10-02-2011, 11:47 AM
Emmegi

Re: A320 FMGS beta 22

Hey guys,
I have noticed that FMGS coupled with FS2004 is (in my case) much better than FSX: more stable, no steep climb or descent, no AP disconnections until the approach phase. This still represents a problem.

Regards

MG
10-02-2011, 01:10 PM
jeehell

Re: A320 FMGS beta 22

Hello,

I've been away last couple days, sorry for delay.

Concerning the AP issue, it maybe comes from the provided flight model. I will do some more tests when I'm back.
Access violation errors: if you don't tell me which modules produce them, I cannot help...

Regards,
JL
10-02-2011, 02:49 PM
jules744

Re: A320 FMGS beta 22

Hi Jeehell

I would like to help you to find all small bugs because It's a very nice product .

For my I have found this :

- Brake temp 's cooling to fast without brakefan
-The speed in mach has not been reach in hight flight level for exemple it 's reach .77 at FL360
-The Managed mode Descent calculated a wrong descent path with altitudes restrictions (Below and Above )
-In FMGS when approach 's selected that not ILS04R in F-PLAN ( that LFMN04R)

respectful and friendly

Jules,

Show 40 post(s) from this thread on one page