Hi.
I still have problems whenever I start FMGS. Any ideas?
Thank you! ;)
http://www.mycockpit.org/forums/atta...id=12488&stc=1
Printable View
Hi.
I still have problems whenever I start FMGS. Any ideas?
Thank you! ;)
http://www.mycockpit.org/forums/atta...id=12488&stc=1
Quote:
Originally Posted by jcostabal
I have this same issue!
Anyone else with all indicators in FMA always in frames? Reinstallation both server and client doesn't help.
--EDIT--- After 4 days and about 6 flight legs it's OK, without change anything.
So do the EGT needles :o
Was there any fix for no EGT needles being displayed? they have been missing for several updates now.
John
With 48.2.2 I have got no problems with EGT needles not being displayed!
That is strange, all the digital displays for EGT work fine for me but no needles are displayed.Quote:
Originally Posted by romeow
Anyone have any idea what I can do to fix it?
John
I think we should wait for the next update ;)Quote:
Originally Posted by cmdr114b
Yes, your probably right I will wait and see.Quote:
Originally Posted by Leonidas
Update to my latency problems: I re-installed B48.2.2. First I also had the problem, that after "flap open" the APU didn't start.
Then after refreshing the Nadata, APU did start but couldn't start the engines. APU Bleed did not turn air to engine after switching Eng Start knob to ignition.
After some trial and error'ing I finally switched off APU, external Power and even Batteries, but displays and APU stayed on for at least 5 minutes.
Version 48.2.2 seems reallly strange to me :-(
Anyone with FSX and 48.2.2 that has similar problems, or solutions?
Michael
If you are having a bug can you guys please log it on the bugtracker? This way JL can prioritize the bugs, features that need to be fixed. I don't see a bug logged for the EGT needle.
Regards.
Autopilot disconnects P3Dv4:
Recently i have had an issue with the autopilot disconnecting randomly. Sometimes it disconnects every minut or so, sometimes every 10-15 mints and sometimes much longer intervals.
There is no clue on the ECAM as to why.
Anyone know what this might be?
On another subject I recently saw quite large upsets on intermediate approach when selecting Flaps 1.
Any clue?
Thanks in advance :-)
Ben, I would if the bug tracker would send me the confirmation email, when I try to register I never receive the email.Quote:
Originally Posted by OmniAtlas
John
I have asked Christoph to look at this -- thank you.
Hi Rafape, I have just retried the intercom app together with Virtual Audio Cable and I also get this access violation dialog box and you are unable to close intercom app unless you use the task manager.Quote:
Originally Posted by Rafape
To fix this, make sure you start up the app with admin rights. Now I only get the error when attempting to close the application.
I will attempt to put up a tutorial on how to get VAC working with intercom soon -- it works well, and hopefully try and interface it with a real ACP.
Final update to my latency and engine start problems: I did a clean reinstall of B48.2.2 (manuall deinstalling the existing version before) and now everything is working again. @Rene, thanks for your help!!
Also the stuttering is gone now, which seems to be not an effect of the B48 version, but the updated version of Teamviewer.
@Dieter, thanks for visiting and all your expert support on my system. Really appreciate it!!!
Michael
Intercom.exe work around:
B48.2.2 Starter.ini , Intercom=no
Run B48.1 Intercom.exe as admin right. Then it works fine.
I got 2 headset setup for both CPT & FO working perfectly on VATSIM with both ACPs functional. Interphone is great to try out.
Thanks OmniAtlas for your tutorial with VAC :)
Hi JL,
Here are some ECAM mistakes I have noted.
Fuel Mode Sel MAN: incorrect MAN CAB PR CTL in STATUS page
Cabin Pressure Mode Sel MAN: no MAN CAB PR CTL in STATUS page
Fuel L TK Pumps 1+2 off: incorrect R TK GRAVITY FEED ONLY in STATUS page
Fuel R TK Pumps 1+2 off: no R TK GRAVITY FEED ONLY in STATUS page
Hi Alamwuhk - would you mind posting this important ECAM bug up on the bugtracker so it will not be missed by JL so so he can prioritise a fix. Thank you.
[QUOTE=masterp;169914Thanks OmniAtlas for your tutorial with VAC :)[/QUOTE]
Is the tutorial privat or for public?
regards
peter
Sure will do!
Quote:
Originally Posted by OmniAtlas
hello! Can we get all the tutarial from OmniAtlas for the intercom or is it secret?Quote:
Originally Posted by masterp
best regards
peter
See here
http://www.soarbywire.com/NYpZd/
For some reason the redirect links never seem to work correctly, so the link above may not work for you. In that case just go to http://www.soarbywire.com , click on FMGS on the menu button, then FMGS Tutorials.
All the tutorials for FMGS are posted there.
Delete. Posted by mistake.
Hello,
Are there any news on the ILS Problem? Yesterday at Dublin EIDW there was no correct ILS Signal.
Regards
Niklas
There is no ils problem.
Correct!Quote:
Originally Posted by jeehell
@ Niklas
Your ILS problem is caused by the ILS frequency within your NavData file and the one within the AFCAD file of the corresponding airport scenery. These two frequencies are probably different and therefore generate this problem
Regards
René
I can confirm... 2 flights with this version , 0 problem :)Quote:
Originally Posted by jeehell
Hello all,
yesterday I change my system to version B48.2.2. Thank you JL for the new Version, but after 3 flights I have two problems.
The SPLRS/ARM funktion does not work. If I use the SPLRS/ARM Switch the LED lights up a second but the Spoiler will not be armed.
I use a Switch for this funktion. In all other Versions it works fine.
The other problem, on the second flight the autothrust is no longer activated. On first flight it works perfect.
What can I do to solve the problems?
Best Regards
Micha
I had exactly the same problem and I fix it with a checkbox in my FDS card configurator. How do you connect your spoilers arm button? Do you have FDS in-out card too?Quote:
Originally Posted by Airmichel
Hello Leonidas,
IHello all,
yesterday I change my system to version B48.2.2. Thank you JL for the new Version, but after 3 flights I have two problems.
The SPLRS/ARM funktion does not work. If I use the SPLRS/ARM Switch the LED lights up a second but the Spoiler will not be armed.
I use a Switch for this funktion. In all other Versions it works fine.
The other problem, on the second flight the autothrust is no longer activated. On first flight it works perfect.
What can I do to solve the problems?
Best Regards
Micha
connect all my Button over Sioc from Opencockpits with Jeehell Sioc Creator.
In Sioc Creator is no funktion to chance somthing.
Regards
Micha
Hello Leonidas,
I connect all my Button over Sioc from Opencockpits with Jeehell Sioc Creator.
In Sioc Creator is no funktion to chance somthing.
Regards
Micha
Hi all
I changed my system to P3D v4 and FMGS 48.2. Since now with new setup, my bus does not start cold and dark. I always have a powered on cockpit, even when switching off my batteries packs. I am using Skalarki HW.
All systems seem to be connected to each other , see pics. In that configuration I can't start the APU (fuel is on board). Could it be, that the new FSUIPC Version 5 which is in beta stat is not compatible yet?
Thank you for a hint, what to check next....
Best regards and a nice Sunday.
Stefanhttp://www.mycockpit.org/forums/atta...id=12499&stc=1http://www.mycockpit.org/forums/atta...id=12500&stc=1http://www.mycockpit.org/forums/atta...id=12501&stc=1
Quote:
Originally Posted by Miatanet
Stefan,
I have the same setup as you Skalarki, P3Dv4, FMGS 48.2 and FSUIPC and it all is working.
I did have an problem with P3Dv4 which gave me similar issues and I had to do a re-installation of P3D.
Another thing that has caught me out in the past was the simulator was Paused and I had not realised it, might be worth a check.
John
Hyi JL, hyi all!
Since I got stutter problems in B47.6 (as a few others with FSX), I did a complete de- and a clean new install with B48.2.2.
First flight was without problems, hardwareconnect.exe needed around 4% CPU usage.
After closing all, PCs shutdown and starting a new flight next day (no changes inbetween of course), stutters are again here with hardwareconnect CPU usage of 25%, causing Stutters on FSX (definitely no FSX problem, which runs on addon airports with V 0,2%, if JLFMGS is closed). No other programs running, no net connection.
Same behaviour with B47.x, got a friend with exactly the same layout and exactly the same problems:
1 server, 1 client, only running (and clicking during setup!) Skalarki and VAS on server.
Maybe it is normal, that Hardwareconnect.exe needs that much CPU - so I have to go for a 2nd client - Please can any FSX user post if this is normal or not, thanks.
By the way, back to B45.3, no problems at all.
Thanks for help,
Kind regards
Michael
EDIT:
troubleshooting:
- deinstalled FMGS
- clean install FMGS
- repair of P3D v4
- setup controls via configure.exe
All seems to be connected, no power at startup, so started BAT1 and 2, startet procedure for APU start, but no reaction, both led's are on, also om the software OHP, but it does not come up. When getting aux power, I see that ECAM switches to APO screen, after a second open flaps comes up on the screen, but no more reaction of the APU power.
So, still hanging here.....
Best regards
Stefan
Hi John
you mean a clean install of P3D v4? De-install current P3dv4 and reinstall from scratch? Or just a "repair" installation?
Best regards
Stefan
Quote:
Originally Posted by cmdr114b
John had a very clever remark about P3D being paused. Make sure it was not paused beforehand, and maybe uncheck the pause on lost focus thing.Quote:
Originally Posted by Miatanet
Hi all
thank you for your hints, was in vacation for few days, will check tomorrow and will report.
Best regards
Stefan
Hi all,
does anybody know what this green dotted arc means which is displayed on ND? I don't know if it's part of WXR or not.
Regards
René
Hi Jeehell,
Update to the last Version some weeks ago, and for me all works very nice! Thanks a lot!
These days I got a genuine Cabinsign (Seatbelt/ No Smoking) and I like to link it up with the offset (78EE and the corresponding value) for this switches on the overhead. But some one said to me that the offset in your list doesn't´t work for a "Output" it´s only transmit the switch position. Can you help me/ us with this?
King regards
Florian