A320 FMGS beta 26

Hi,

weird... I'll try to fix that...

JL

Quote:

---

Originally Posted by jeehell

weird... I'll try to fix that...

---

When using the IOCPConsole all the key strocks are actually detected but not all of them displayed onto the MCDU.

Thanks JL :D

And just to complete I finished my Opencockpit MCP and EFIS installation with SIOCCreator. All sound good except like the same issue. When I use any rotator (like HDG, ALt ...) I also have like the same behaviour only one few steps among all steps are detected by the soft. It makes that rotating switches doesn't seem to be fluently detected.
Maybe the same source as MCDU button detection :???:

If you need any log or anything else do not hesitate as usual.

Thanks again for the great work :D

Hi, would like to know the exact procedure and wich and where files to copy to get the MCDU from FDS working, the readme is not very clear on this regard.

Hi,

1) You need to copy all files from "FDS_Modules" to "MCDU" (except the readme...).
2) Then in the "MCDU" folder, open IITcreator.exe, select the MCDU in the left column (trick: push any key on your MCDU) and do a right click (on the card name in the left column still).
3) Select in the menue "CPT MCDU" or "FO MCDU" as required.
4) THEN CLICK SAVE in the menu at the upper left top of the sofware!

Now you should be able to use your MCDU.

Cheers,
JL

I did all the steps, but one more thing is unclear, have i to start the cdu controller module from fds and select something or not?
Another problem is this error when i start the mcdu "Read beyond end of file"

And the MCDU (hardware) not working.

Davide, check your e-mail, I sent you a different versions of MCDU and IIT files.

JL

Hi JH,

many thanks for your great cockpit software.
Unfortunately, I have a problem with the B19.1 release.
The new offsets will not work.
When I read about the FSUIPC a switch assigns an offset does not work.
I started with version B14 and it worked.
Example:
Beta14 - Battery1 offset 66D3 Parameter 2 - Works
Beta19.1 - Battery1 offset 78EE Parameter 82 - Does not work
What am I doing wrong?

Thanks for your help
Micha

Hi,

First, for those having troubles with OC MCDU, please try to download this file: http://www.jeehell.org/SIOCmodule.zip, unzip and replace in the "OVHD" and "FMGS Server" folders.


Micha, can you make sure you have the file called FSUIPC.dll in the "OVHD" and "FMGS Server" folders?
I tested here, I didn't have any troubles at all!

JL

Hi JL,

Thanks for the quick reply.
Yes! FSUIPC DLL is present in both folders.
Could it be because I work with FS9?

Greetings Micha