Re: FSUIPC Run options for FSX
Quote:
Originally Posted by
Peter Dowson
Sounds like it's somehow getting truncated. The entire line is 126 characters, which is close to one of the possible limits (128 including 0 terminator) -- though it might be 256 (I don't know without wading into the code). What about the suggested short renaming?
I have tried renaming, still the same. I am not an expert on this, but I could try uninstalling the RSM products and re-install in a smaller in characters directory instad of ,"C:\Program Files (x86)\Revolution Simproducts\Throttle quadrant manager\" to ,"C:\Program Files (x86)\RSP\Throttle quadrant manager\" , in order to minimize the characters of the address....
Quote:
Originally Posted by
Peter Dowson
[LATER] Checked FSUIPC4 code (you've not told me anything about versions yet), and it can take well over the max possible path handled by Windows. I added your line to my INI and this was logged:
122219 FSUIPC couldn't run: "C:\Program Files (x86)\Revolution Simproducts\Throttle quadrant manager\RSim throttle Project Magenta.exe" [Error=2]
The error is "file not found" which is understandable because I don't have it. What does your log show (to repeat the question)?
I have no errors, but I will check this afternoon again.
Quote:
Originally Posted by
Peter Dowson
Please also see my last reply where I asked quite a few additional questions. I still have insufficient information.
Pete
Sorry I didn't see your last post :) my reply is above,
Thanks
Nick
Re: FSUIPC Run options for FSX
Quote:
Originally Posted by
Nick1150
but I could try uninstalling the RSM products and re-install in a smaller in characters directory instad of ,"C:\Program Files (x86)\Revolution Simproducts\Throttle quadrant manager\" to ,"C:\Program Files (x86)\RSP\Throttle quadrant manager\" , in order to minimize the characters of the address....
Why? I already reported that this isn't the problem, and even showed a portion of my log when I tried your "long" line. You seem to be skipping most of the contents of my replies. :-(
Quote:
I have no errors, but I will check this afternoon again.
Why would you have an error? I had an error with your line because I don't have your file to load. But obviously your line IS loading a file. The point is that the log will show you the exact line being sent to Windows!
Quote:
Sorry I didn't see your last post :) my reply is above
Where? :-(
I still don't know what version of FSUIPC and there's no log shown anywhere. The log is the first and obvious place to look as it tells you what FSUIPC is doing.
It is very difficulty to help when I have to eek out information one tiny bit at a time. And it takes weeks instead or hours. I think I'll abandon the attempt now. If you still want more help please visit my Support Forum.
Pete
Re: FSUIPC Run options for FSX
Quote:
Originally Posted by
Peter Dowson
Where? :-(
Post # 20
http://www.mycockpit.org/forums/show...l=1#post120242
Re: FSUIPC Run options for FSX
Quote:
Originally Posted by
Peter Dowson
Why? I already reported that this isn't the problem, and even showed a portion of my log when I tried your "long" line. You seem to be skipping most of the contents of my replies. :-(
Why would you have an error? I had an error with your line because I don't have your file to load. But obviously your line IS loading a file. The point is that the log will show you the exact line being sent to Windows!
Where? :-(
I still don't know what version of FSUIPC and there's no log shown anywhere. The log is the first and obvious place to look as it tells you what FSUIPC is doing.
It is very difficulty to help when I have to eek out information one tiny bit at a time. And it takes weeks instead or hours. I think I'll abandon the attempt now. If you still want more help please visit my Support Forum.
Pete
Please allow me to attach my FSUIPC4.ini as well as the log file this afternoon.
Thanks in advance,
Nick
Re: FSUIPC Run options for FSX
The FSUIPC4 file I promised:
[General]
UpdatedByVersion=4703
History=ARJFBC5H3DOX1LSJ770LV
TCASid=Flight
TCASrange=40
AxisCalibration=No
DirectAxesToCalibs=No
ShowMultilineWindow=Yes
SuppressSingleline=No
SuppressMultilineFS=No
AxisIntercepts=No
DontResetAxes=No
GetNearestAirports=No
WeatherReadFactor=2
WeatherRewriteSeconds=1
CustomWeatherModify=No
SimConnectStallTime=1
LuaRerunDelay=66
Console=No
MouseWheelTrim=No
MouseWheelTrimSpeed=1
JoystickTimeout=20
PollGFTQ6=Yes
BlankDisplays=No
FixControlAccel=No
FixMachSpeedBug=No
VisibilityOptions=No
OneCloudLayer=No
CloudTurbulence=No
CloudIcing=No
GenerateCirrus=No
SuppressCloudTurbulence=No
MaxIce=-4
MinIce=-4
UpperWindGusts=No
SuppressWindTurbulence=No
SuppressWindVariance=No
WindTurbulence=No
TurbulenceRate=1.0,5.0
TurbulenceDivisor=20,20,40,40
SuppressAllGusts=No
MaxSurfaceWind=0
WindLimitLevel=200
WindDiscardLevel=400
WindAjustAltitude=No
WindAjustAltitudeBy=2000
SmoothBySimTime=No
WindSmoothing=No
WindSmoothness=2
WindSmoothAirborneOnly=Yes
PressureSmoothness=0
TemperatureSmoothness=0
DisconnTrimForAP=No
ZeroElevForAPAlt=No
ThrottleSyncAll=No
WhiteMessages=No
ShowPMcontrols=Yes
SpoilerIncrement=512
MagicBattery=No
RudderSpikeRemoval=No
ElevatorSpikeRemoval=No
AileronSpikeRemoval=No
ReversedElevatorTrim=No
ClockSync=No
ClockSyncMins=5
ClearWeatherDynamics=No
OwnWeatherChanges=No
TimeForSelect=4
LoadFlightMenu=No
LoadPlanMenu=No
PauseAfterCrash=No
BrakeReleaseThreshold=75
SaveDataWithFlights=No
ZapSound=firework
ShortAircraftNameOk=No
UseProfiles=No
[JoyNames]
AutoAssignLetters=No
0=CH ECLIPSE YOKE
0.GUID={DBFB22F0-844A-11E0-8002-444553540000}
2=BU0836X Interface
2.GUID={486A1E90-844C-11E0-8006-444553540000}
[WideServer]
WideFSenabled=Yes
AdvertiseService=1
Port=8002
Port2=9002
[Sounds]
Path=C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Sound\
Device1=Primary Sound Driver
Device2=Speakers (Realtek High Definition Audio)
Device3=Realtek Digital Output (Realtek High Definition Audio)
Device4=Realtek Digital Output(Optical) (Realtek High Definition Audio)
[Buttons]
ButtonRepeat=20,10
1=P2,0,C66059,0
2=U2,0,C66060,0
3=P2,1,C66240,0
4=U2,1,C66240,0
5=P2,2,C66376,0
6=U2,2,C66376,0
7=P2,3,C65560,0
8=U2,3,C65560,0
9=P2,7,C66072,0
10=U2,7,C66073,0
11=R0,2,C1001,0
13=R0,32,C65615,0
14=R0,36,C65607,0
15=R0,11,C65676,0
16=R0,12,C65678,0
17=P0,10,C66147,0
18=R0,13,C65680,0
19=U0,12,C66147,0
20=U0,11,C66147,0
21=U0,13,C66147,0
22=R0,1,C65588,0
23=P2,6,C66378,0
24=U2,6,C66378,0
25=P2,5,C66239,0
26=U2,5,C66239,0
27=P2,4,C66379,0
28=U2,4,C66379,0
31=U0,2,C1002,0
32=P0,0,C2040,0
36=P0,23,C66463,0
37=P0,25,C66464,0
[AutoSave]
AutoSaveEnabled=No
[GPSout]
GPSoutEnabled=No
Port=COM0
Speed=4800
Interval=2000
PosTo6Decimal=No
Sentences=
[GPSout2]
GPSoutEnabled=No
Port=<none set>
Speed=4800
Interval=2000
PosTo6Decimal=No
Sentences=
[ClientNames]
1=CPT
2=EICAS
3=FO
[Programs]
RunIf1=READY,CLOSE,C:\PFD\pfd.exe
RunIf2=READY,CLOSE,C:\pmSounds\pmSounds.exe
RunIf3=READY,CLOSE,C:\MCP\MCP.exe
RunIf4=READY,KILL,C:\Users\Boeing737\Desktop\B737.exe
RunIf5=READY,CLOSE,"C:\Program Files (x86)\IOCards\SIOC\sioc.exe"
RunIf6=READY,KILL,"C:\Program Files (x86)\SquawkBox\squawkbox_fsx.exe"
RunIf7=READY,KILL,"C:\Program Files (x86)\Revolution Simproducts\Throttle quadrant manager\RSim throttle Project Magenta.exe"
[JoystickCalibration]
AllowSuppressForPFCquad=Yes
ExcludeThrottleSet=Yes
ExcludeMixtureSet=Yes
ExcludePropPitchSet=Yes
SepRevsJetsOnly=No
ApplyHeloTrim=No
UseAxisControlsForNRZ=No
FlapsSetControl=0
FlapDetents=No
ReverserControl=66292
Reverser1Control=66422
Reverser2Control=66425
Reverser3Control=66428
Reverser4Control=66431
MaxThrottleForReverser=256
AileronTrimControl=66731
RudderTrimControl=66732
CowlFlaps1Control=66162
CowlFlaps2Control=66163
CowlFlaps3Control=66164
CowlFlaps4Control=66165
SteeringTillerControl=0
MaxSteerSpeed=60
[Monitor]
Re: FSUIPC Run options for FSX
That's an off topic reply, please forgive me guys:
BTW Pete take a look at this thread, I think it has to do with FSUIPC4
http://www.mycockpit.org/forums/show...!!!?highlight=
Off topic mode off
Thanks
Nick
Re: FSUIPC Run options for FSX
Quote:
Originally Posted by
Nick1150
The FSUIPC4 file I promised
The INI file tells me nothing. It's the log file which shows what it sent.
I'm not able to get here for a few days. Please try the Support Forum if you need more help. This could go on for weeks like this. :-(
Pete
Re: FSUIPC Run options for FSX
Re: FSUIPC Run options for FSX
Hi Nick,
I am curious as to why some lines are in quotes, could this make any difference?
[Programs]
RunIf1=READY,CLOSE,C:\PFD\pfd.exe
RunIf2=READY,CLOSE,C:\pmSounds\pmSounds.exe
RunIf3=READY,CLOSE,C:\MCP\MCP.exe
RunIf4=READY,KILL,C:\Users\Boeing737\Desktop\B737.exe
RunIf5=READY,CLOSE,"C:\Program Files (x86)\IOCards\SIOC\sioc.exe"
RunIf6=READY,KILL,"C:\Program Files (x86)\SquawkBox\squawkbox_fsx.exe"
RunIf7=READY,KILL,"C:\Program Files (x86)\Revolution Simproducts\Throttle quadrant manager\RSim throttle Project Magenta.exe"
Kind Regards
Bernie.
Re: FSUIPC Run options for FSX
Quotes are used when the address has spaces ;)
