The last piece of the puzzle

I am hitting the red button for the individual switches for different cards..

Now try with Digital Input Component and not Digital Input Phidget.

heh? click digital input tool, and not the actual switch?

Digital Input Component. Exactly as I did it.
For now we're doing proof-of-concept.
Once you know design will work you can then assign phidget input to the component.

I don't have phidget cards with me at the moment.
Is also easier to address one problem at a time.

k..Will try hen i get a free moment

Q. How do i get the Decrease to get "power"??? Whenever i move it like your instructions said, it just draws off the connector, as shown.

A. The switch needs to be on other side of connector. Exactly the same as pic. Press Left Arrow to move the decrease switch to the left of the connector.

Will Try that....

Ok..got teh circuit set up as described. YAY!! flip the switches the text box show the prop value moving back and forth, good. Load up FS..get into Baron, hit the prop switch, Prop lever drops to 1% and will not move, bummer. Meanwhile the value in FS2P IS moving, but FSX is not.

The Plot thickens...

Make sure Fs Input UseRatio property is set to false.
We want to use value in range 0 - 16383 (what integrator pumps out). Not 0% -100%

There is a problem with adding a Digital Input Phidget as first component.
Fixed it, now that you have pointed out problem, but for now let's pursue design phase (proof-of-concept).

Use ratio is set to false. I can see the value change, and the little bar above the output icon move. But the prop lever in FS does not, hit the switch it falls to 0 and stays there.