Printable View
Hi JL, Hi All,Quote:
Originally Posted by jeehell
Radio works again, thanks for this!!!! ;)
But got another small issue with both QNH Displays... The Display is flickering and when i turn the ANN LT Switch on the OVHP to "Test" it goes blank.
Does this issue also anybody with Opencockpits Hardware?
By the way: Has one of you a script for the Brake Pressure Gauge? I have build it with 3 Servos and a OC Servorcard. :)
Regards Florian
Hi Jean Luc,
I am having a serious issue after the latest update.
My Joystick movements are received by FMGS as the + on the PFD moves.
However after turning both engines on - neither Ailerons, rudder or elevator moves.
Flaps and Speedbrake can be moved - (also joystick axis).
Any idea what can be wrong?
/Stephen
Are you sure you have HYD circuits pressurized and ELAC/SEC/FAC ON?
Yes - on HYD page all show 3000 PSI and 1 & 2 are white.
On the F/CTL page all turn from red to green during power up.
Already have turned all ELAC/SEC/FAC Off and back to on to test if that helps...
No luck...
Also verified in the Joy setup. All axes are received correctly there...
Since you seem to be the only one with this issue, I can only think it's something on your setup...
Check firewall, antivirus, admin rights, reinstall, re-do the axis config from scratch...
Regards,
JL
Seems to have been something in the AP/FBW module that has been reset. Was showing "Select...".
After Selecting PA320 and fiddling with the sensitivities all is back to normal.
Odd... :-)
Short Notice...
The Flickering QNH came from a broke PSU in my Setup... change the Device and all works fine again! Sorry for this...
But maybe somebody can help me with the Script for the Brake Pressure Gauge with 3 Servos and a Servorcard from Opencockpits? :)
Looking forward
Cheers
Florian
Hi JL, 38.8 last update no backlight for CockpitSonic devices...FCU, Radio and ECAM :(
Another thing : i can't select on my radio freq like xx.620 . I have only .615 or .625 ... why ?
Hi JL,
im am searching for an explanation for a strange behavior since days.
Again i see white FDs (FO and CPT) on a certain quadcore pc, even after complete reinstalling of W7x64 and FMGS B38.8, switching firewall off etc. All instruments work on this machine, except the FDs.
On other hardware all it works fine. As far as I remember, this came after an update to B38.8.
If I cannot solve this, i have to change the hardware. Should not be a problem, but i do not understand what this can be.
Any hints?
thank. Gu.