Hi JL
After last update I have two problems:
1. Cockpitsonic's ECAM control panel works but not backlighted.
2. CPFlight's FCU works but LED digits got creazy...
Printable View
Hi JL
After last update I have two problems:
1. Cockpitsonic's ECAM control panel works but not backlighted.
2. CPFlight's FCU works but LED digits got creazy...
Hi Guys,Quote:
Originally Posted by Leonidas
because of the backlight problem...
Got the same issue with the Cockpitsonic Radio.
..........
..........
@Stephan
correct!
I also stopped the firewall and disabled a lot of unnecessary services and Windows system functions.
BUT.
When I do FMGS updates (frequently like now), i use the firewall, because the system goes to the web, and I want to avoid to catch any desease in my clean network :wink: Can recommend this to you too...
I would prefer to update from my instructor station as source, which is connected to the web and has a firewall to inside the sim network. Seems not to be possible.
Also there is at least one PC with sqwawk box and running and this one is permanently on the web!
Gü.
-> see a320.at
Hi Leonidas and Tcane,
I put an update which should correct these issues, keep me posted.
JL
Thanks JLQuote:
Originally Posted by jeehell
It's OK now, but in my quick flight I noticed that pushing the ALT knob its dot doesn't turn on. Anyway, I'll see it again when I have enough time.
Regards
I have also had to go back to 38.6 as could not connect to the client.
Brian W
Sorry for the short answer on the last post but I was using my Microsoft Pad and for some strange reason it is extremely difficult to type messages on this site, so much so that I normally write them on Notepad and copy and paste to this site.
Anyway the reason That I was having trouble may have been due to the Control installs which I had to re-do, so will do some more checking tomorrow and do an upgrade to the latest and report back.
Regards.................Brian W.
Hi Jeehell, i have the FDS FCU, why at the start of FMGS server it doesn't pool the switch positions? for example i have set the switch to VOR 1 but the displays not show that i have to recycle it, same thing for the ARC or ROSE mode, can you sync it at the start?
Thank you!