don't think there are any.
I guess, you need to program them yourself
Printable View
don't think there are any.
I guess, you need to program them yourself
Michael is right! Either you have got three joystick buttons you can assign within FMGS_Config.exe > Joystick Buttons or you might be successful to use FSUIPC with your keyboard keys and the corresponding offsets (see Jeehell's Advanced User Guide, page 25).
Dear,
I try to configure my ECP. I use simple push button. When I calibrate the buttons, what to use Push, Release or Toggle? This is driving me crazy!
BTW You don't calibrate buttons you configure them. Axes are calibrated! Anyway, for buttons you use
Button Push Action
-Push Event (action= ON) -> in combination with Button Release action > Push Event (action=OFF)
-Toggle Event for ON/OFF (not used for ECP as far as I know).
Ok. Thank you.
That means for ECAM Switch Panel equipped with push Buttons: Push Event in combination with release event?
No.
Button Push Action > select 'Push Event'
Button Release Action > select 'Push Event'
I have something similar with red button AP off during landing.
The first time works fine, but when I fly back without restart FMGS, when I press AP off red Master Warn and chime don't stop until I press red button again, but then light up FOs Stick Priority arrow and never goes away cos I dont have FO sidestick. I have Push Event --> CPT APTO and Release Event --> Nothing.
So, the first time works well, but not the second one.
Regards
I have tried, but it does not work. I can not switch. If I press All, the screens runs with no stop possible all ECAM pages. Any idea what could be wrong?
Sorry, probably my mistake.
Button Push Action > select 'Push Event'
Button Release Action > select 'Release Event'
Keeping ALL pressed, pages swap. When you release the button ALL swapping should stop. Hope it will work!