Printable View
Sorry, you're right, that backup are AControls.cfg and joySW.cfg.Quote:
Originally Posted by jeehell
So, I can't even execute FMGS_Config.exe. It doesn't run (no message). Anyway, that update for Navigraph (Sept. 12) was so big (hundrends items downloaded) or something went wrong with update?
Best regards
*****Reedit********* Don't spend your time with this, I reinstalled it and it's OK.
Thanks a lot.
Clearly something went wrong in the updating process??Quote:
Originally Posted by Leonidas
Start back from b42.0 install package and update again.
Quote:
Originally Posted by Maddin91
Hello Maddin,
in case TQ is connected to remote PC do it like this:
1. start remote and server PC
2. start FSX or P3D, or which one u ever use
3. start profiler on remote pc ( hope u settted levers up in profile before?)
4. start FMGSconfig.exe
5. run profile in Profiler on remote PC
6. now on server PC click in the field for TQ axe and move the lever to detect them
This is how it is working!
GL and HF....
Regards Marco
JL FMGS is now supported on the navigraph 1510 cycle -- https://www.navigraph.com/ViewNews.aspx?newsId=80
Hey JL,
i did set admin rights to all executeables on each PC.
Pls have a look to this video, there you can see how the levers work with new version.
https://www.facebook.com/ProjectA320
Regards Marco
It looks as if the AP/FBW module is not connected to the FMGS server? Can you check that on FMGS Server window?
For a change something quite different!
I've noticed that A/THR can't hold selected or managed speed as soon as wind speed changes are too excessive. In this case N1 decreases and stays between 66 and 72% - not enough to maintain speed. The blue arc asks more thrust but it looks like the needle can't exceed the 70 %. So the aircraft constantly loses speed.
Do all of you know this "bug" or am I the only one? Is this a problem of JH's software, of FSX or of the weather engine? Any workaround?
Regards
René
BTW While cruising with calm winds (or no weather loaded) A/THR works perfectly.
Tnx for your response, i'll try if it's ok next time ;)Quote:
Originally Posted by jeehell
Hallo Jean-Luc,
Just doing a flight with the Navigraph database. I am missing the VOR, NDB, WPT and ARPT on the ND when selected by the EFIS. And yes, I copied the five .bin files to the NAVDATA folder on the ND PC.
Best regards,
--pim
Quote:
Originally Posted by jeehell
Hi JL,
AP/FBW Module is connected...
Firewall off as well....
I started again Beta 41.2 and tested, and thrustlever working again....
Any Idea?
@Pim: there are more than 5 (9 IIRC), dont be hasty... and wait for the MCDU status page to stop displaying "navdata loading".
@simstar: another user just told me he had the same issue, he said running the software FCU solved it, but I have doubts about that. Do you have the software FCU running or not?
JL
Hallo Jean-Luc,
I made a 90 minute flight yesterday and even at the end there were only five .bin files. This morning I deleted all .bin files and I got the same result. See also the content of logndb.txt after 30 minutes.
Best regards,
*9:59:54* Navdata module launched Server
*9:59:54*
*9:59:54* -BGL scan:
*9:59:54* -ScenerycfgPath:C:\ProgramData\Lockheed Martin\Prepar3D v2\scenery.cfg
*9:59:54* -FSroot:P:\P3D\
*9:59:54* -Folders Nb:182
*10:00:34* -FS ILS Nb:6362
JH,
is there an offset for the IDG DISC buttons? Can't find it in the Offset list.
Regards,
Martin
Make sure your client PC also has the same .dll file.Quote:
Originally Posted by Pim van Vrijaldenhoven
Hallo,
I just copied the whole folder to the clients. Restarted everything and still no success unfortunately. I am still at version JHW150601.
Best regards,
--pim
@Pim : you have an issue with the navdata system, I do not know where.
Reinstall the software from 42.0 then do the updates.
Then reinstall the navdata (make sure to remove all traces of previous navdata folder).
@Martin : no, only for the LEDs, no idea why I did not add the buttons, I'll do it for next version.
Hallo Jean-Luc,
Installed everything again. Reloaded the Navigraph file and let the FMGS server run. It created only five .bin files that I copied to the two clients. Restarted everything and the result is the same: no WPT, ARPT etc. on the ND after EFIS selection.
Best regards,
--pim
Pim - run the ND on the server - does it show the waypoints?
Hallo,Quote:
Originally Posted by OmniAtlas
Just tried it. No it does not!!!
Best regards,
--pim
Hallo,Quote:
Originally Posted by OmniAtlas
To make sure: waypoints in a plan are shown, also on the clients. It does not show NDB, VORs, etc.
Best regards,
--pim
which cycle do you use?
what are the names of the 5 bin files you have?
are you sure you updated to the last automatic update available?
The version is: JHW150601Quote:
Originally Posted by jeehell
The files are: arpt.bin, awy.bin, fix.bin, mkr.bin and navaid.bin. There are no other .bin files in the navaid folder.
Of course, everything is the latest version. In MCDU the waypoints and airways work just fine.
Best regards,
--pim
Are you actually able to get SID/STAR/APPR???
You have a problem way before the ND display, at the compiling process, for an unknown reason... As long as you don't have 9 bin files, the ND will not show the VOR/NDB/etc.
It seems it stops compiling while working on the holding patterns, which is weird. It could happen if you somehow try to close the server, but from what you say this is not the case.
Did you try downloading again the navdata file?
You have a navrecord file in both navdata1 and 2 folders on your Server computer?
JL
i put a very quick update for this problem, report with the logndb.txt if you still only have 5 files.
I also could not get waypoints for 1506 cycle. Try the 1510 cycle.
Quote:
Originally Posted by jeehell
Nope, I always running the whole software. FCU is running remote on other PC... going back to Version 41.2 all is working!
Regards Marco
Hallo Jean-Luc,Quote:
Originally Posted by jeehell
I installed the update and it still generates only 5 .bin files with the 1506 airac.
Best regards,
--pim
Hallo Jean-Luc,
I just installed 1510 and I get all the .bin files. EDIT: All is working now!!!!
Best regards,
--pim
*11:03:08* Navdata module launched Server
*11:03:08*
*11:03:08* -BGL scan:
*11:03:08* -ScenerycfgPath:C:\ProgramData\Lockheed Martin\Prepar3D v2\scenery.cfg
*11:03:08* -FSroot:P:\P3D\
*11:03:08* -Folders Nb:182
*11:03:29* -FS ILS Nb:6362
*11:04:49*
*11:04:49* Navdata1:
*11:04:49* -ARPTliste:13545
*11:04:49* -NavaidListe:17401
*11:04:49* -FIXliste:182613
*11:04:49* -AWYsegments:96194
*11:04:49* -Holds:19202
*11:04:49*
*11:04:49* Navdata2:
*11:04:49* -ARPTliste:13545
*11:04:49* -NavaidListe:17401
*11:04:49* -FIXliste:182613
*11:04:49* -AWYsegments:96194
*11:04:49* -Holds:19202
*11:04:49*
*11:04:49* server started on port:8006
Can we conclude the free dataset has some sort of problem?
Well it does work for me...
Hi
After todays' update EWD and SD are black, eventhough server says are connected. ISIS and DDRMI at the same monitor work fine.
What should I try?
Regards.
Hi,Quote:
Originally Posted by Leonidas
Did you try the brightness controls?
Just a thought.
Best regards,
--pim
JL -- with the latest update, rudder is now not controlled.
On the ground on take off the a/c runs off the runway with a rudder right.
In the air when I push the rudder full right, it does not centre on release and bounces full left before returning to neutral.
I have configured my rudder pedal correctly with FMGS config and did not have this issue before the latest update. Regards.
trying to land using B42....GPWS call terrain a head, after touching ground sound retard plane crash
what's wrong with that ?
Hallo,Quote:
Originally Posted by OmniAtlas
I do have the same problem. Landing was also a disaster, I could not keep the A/C on the runway, it went to the left.
Best regards,
--pim
Hi JL!Quote:
Originally Posted by OmniAtlas
I have the same error as OmniAtlas writes. The rudder kicks on the ground of full and can not be reset.
regards
Karl
YES! But they were at full position... Anyway, thanks a lot Pim.Quote:
Originally Posted by Pim van Vrijaldenhoven
Hi
I'll correct the rudder issue tonight.
JL
Hi Jeehell !
Thank you, you're the best and saves my day.
regards
Karl
Update is available.
JL