Use of TIMER Settings Box

Hi Rob
Do you have access to a O-Scope, so that you can look at the output wave form of the Phidget Servo. (White wire)

I have been playing with the Phidget Servo and noticed the output is rock solid using the servo-slider.exe VB Example.

But when I use FS2Phidget, there are dropouts in the Phidget Servo wave form.

Looking at the Phidget Servo output with the O-Scope, AND changing the timer setting will lower the rate of drop outs but they still happen.

David
www.737FlightSim.com

Rob,

Played atround with servos this weekend.
And with lots of help from David and his trusty oscilloscope.
2.0.9 is now available for download.
Servos should be a lot smoother, especially at small timer settings.
Let me know if there is an improvement.

Alan.

Alan,

CONFIRMED!!

MUCH smoother servo operation with build 2.09.

I did find however, the operation is still smoother in my system with the timer set at 1200 ms. and I did have to manually enter a new value for Throttle 1 in the .ini file....otherwise Rev1 would operate at idle.

I think Rob is in Europe right now....so he will be happy when he gets home!

Was wondering also if you have posted his video of the throttles in "action"....where I can find that file?

Regards,

Mel Ott