Immersive Display Pro now with FSX/P3D support

Quote:

---

Originally Posted by OmniAtlas

Thanks for the links -- how many panel boards are you using? Are the seams of the boards very visible when you have the projectors turned on and edge blending enabled?

Its good to know you've managed to achieve a 180 warp with 2x 0.89 TR projectors. Perhaps you could achieve it with a cockpit shell with a shorter TR? The benq w1080st have a 0.69 TR.

---

I used 6 panels, 3 for the top, 3 for t he bottom. I taped and mudded the seams with standard drywall mud. You can hardly notice it. Primed and painted with Sherwin-Williams Duration Satin Extra White that was recommended here: Painting the Perfect Screen for $100

Quote:

---

Originally Posted by ddimm

I used 6 panels, 3 for the top, 3 for t he bottom. I taped and mudded the seams with standard drywall mud. You can hardly notice it. Primed and painted with Sherwin-Williams Duration Satin Extra White that was recommended here: Painting the Perfect Screen for $100

---

I forgot to mention that you should use whole sheets for the center and cut the side sheets to fit your screen dimensions. That will minimize the seams in the middle of your screen.

Thank you for the link, very helpful. This maybe a project I try sometime down the line :)

Ddimm,
Can you please tell me how to setup FSX to work with the Immersive display PRO? I have the Immersive working with my main computer, but I don't know how to start the FSX within the Immersive system. I know that the FSX exe file must be placed within the Immersive files, but where? Please help if you can.

Thanks,

Tommy

Quote:

---

Originally Posted by capttlm

Ddimm,
Can you please tell me how to setup FSX to work with the Immersive display PRO? I have the Immersive working with my main computer, but I don't know how to start the FSX within the Immersive system. I know that the FSX exe file must be placed within the Immersive files, but where? Please help if you can.

Thanks,

Tommy

---

Hi - ImmersiveView starts when my desktop is loaded. Nothing to start before FSX. I sent your request onto Nikola over at Fly Elise-NG to see if he can assist you directly.

Nikola has been great at helping me out with my configuration and has gone above and beyond to make sure the software was working properly.

Thanks ddimm, I got it working.
Tommy