A320 FMGS B31

Hi Jeehell, I redownloaded from the link (A320FMGS_B31.3) you provided and reinstalled. It asked for another autoupdate so I did.

-- The jetmax throttle and ACE yoke use regular axis -- it works in FSUIPC and is fully functioning using the Windows "Set Up USB game Controller" - I disabled the joysticks in FSUIPC and Prepar3d.

Perhaps you could implement an antialiasing immediate effect or 'auto save' in your next release? I did not know I have to click 'save' after each change. The AA works now.

Does anyone have the terrain to download in one big zip file? It is very tedious to download over 30+ datasets from the USGS website.

Thank you for the welcome, I am reading up now on all the available airbus vendors -- I assume all of Skalarki hardware work well with your software and is compatible?

Skalarki hardware apparently works quite well, I haven't tried myself, others can probably share their exeperience.
The USGS data is probably only available on their website (not sure about the legal aspects of re-distribution).

Regards,
JL

i can confirm that skalarki TQ works perfectly.
strange about jetmax & ace yoke...as long as they're recognized in windows they will appear in FMGS axis setup: when i started making the transition to 320 i made a lot of thests with my 737 setup and it used bodnar cards both for yokes and tq...they worked flawlessy...as long as it's pretty "unconfortable" to fly an airbus using a yoke :-)
cheers
filippo

Hi Jeehell,

i delete the Software on both ND Clients and installed the New 31.3 and did the update. Also i Used your default Ports. Now it seems ok, Route is displayed! Also waypoints and ndb etc. But with a bit Delay at every Choice.


But i had also terrible jumps on elevators and rudder in autoflight, also in calm weather conditions. So autothrust also jumps. Had this in the old versions also. Any ideas?

And the Sound when Gear is coming out is nearly the Same in normal flight conditions. No Special rumble, and no louder Air Flow is Heard....

Quote:

---

Originally Posted by jeehell

If you use FDS MCDUs, you must use the dedicated hardware module you'll find in my package. I won't support any method with FDS interfaceIT MCS software or else.
Regards,
JL

---

I contacted TEKWorx Limited to make a 'JeeHell' firmware. And although the 'interfaceIT CDU Rev 5' board is almost 10 years old, I got an update that works perfect. Very great support from TEKWorx!

I updated from B31 to B31.3. It was the first time I could fly for hours without software problems. Great job JL - thank you!

Regards
Adrian

Merry Christmas to all of you and your families ...

... and once again a big thank you to JL for this awesome software!

Cheers
Robert

I can only follow to Roberts post,

Merry Christmas to all and have a nice time. Thanks to JL for creating this jewel of free software!

Regards Henrik

Migration to Prepar3D was perfect. It's fully recommended! Thanks to Jean Luc and happy new year to all.

Merry Christmas to all simmers and a special big Thank you for you Jean-Luc to let me have such great flying moments in my Airbus.
pierre

Quote:

---

Originally Posted by buentead

I contacted TEKWorx Limited to make a 'JeeHell' firmware. And although the 'interfaceIT CDU Rev 5' board is almost 10 years old, I got an update that works perfect. Very great support from TEKWorx!

I updated from B31 to B31.3. It was the first time I could fly for hours without software problems. Great job JL - thank you!

Regards
Adrian

---

No issues with the latest FDS MCDU on sale on their website? Or would you recommend the Skalarki MCDU for compatibility reasons?

The FDS version is full metal; not too sure about skalarki.