That's excelent my friend...
Keep us posted and now that I am back in Athens, we can finally skype together too ;)
Printable View
That's excelent my friend...
Keep us posted and now that I am back in Athens, we can finally skype together too ;)
How do you get the Flaps, Trim, and standy-by gauges to show on the display? Is there a key function i'm missing?
Thanks
The trim gauge is embedded in the upper EICAS and is an option than can be enabled in the instructor station. The other gauges are turned on by using the right moue button in the window and selecting them. Next, move them to desired location and size them correctly.Quote:
Originally Posted by 737NUT
good morning
I have problem with the cdu (opencockpits). It seems to be connected with hardware and software server as I check. Also the sioc is running with your script and the iocp server Sais that 1 client connected.
In the ini file the index is 2 “USBKeys=2, 15” (in my case for devise is 15) but unfortunately nothing happened. Is there anything I can do?
Thank you
Hello,Quote:
Originally Posted by colossos
Can you open the IOCPConsole in SIOC and scroll to variable 50 to check if it receives the key input? When you press a key on the CDU, there should be a number in variable 50. If it stays on 0 when you press a number, then there is configuration problem in SIOC.
Yes you are right in iocp console in binary value section nothing change except in the right section who it write the number of the pressed key for example “50=72 – CDUKey / 50=0 – CDUKey” when I make log on.
I attach my ini file to check it because I don’t know what else to do and the script too
Hi Marty,
I'm starting to test your beautiful software. But I just find some small problem:
I have MCP Cpflight Rs232 with USB converter, and EFIS Control Panel.
1) when I switch On the First FD (master) and the second, both stays LIght Up.
2) ALL the buttons works but no lights appear when I select a button.
3) The V/S display does'n work, just stay blank.
4) It's normal when I close ProsimMCP, the MCP (hardware) remain all displays illuminated?
For the moment
It's all
Many thanks
Arnaldo
Could you check if you press and hold the 'A' key, does variable 50 show a number?Quote:
Originally Posted by colossos
It should return to 0 when you release the key.
Thanks for your comments!Quote:
Originally Posted by bagarie
I have had reports of your problems before and they seem to indicate an MCP firmware that is too old. My test unit is an old RS232 CPFlight MCP with a USB converter, and it works with firmware release 301. When you power on the unit, you will see the words "REL" and a number. This number is the firmware that is currently installed.
Regards,
Marty
I found the problem where it was. By my mistake I deleted the “sioc variable offset 50” of config panel of cdu. Now it’s ok.
Anyway I have some notice to make but I prefer to check it more for a couple of days and i inform you all together.
Thank you anyway