Originally Posted by
Wendy
Hey Bernie,
your explanation of ProSim configuration for Leds is correct.
The PCB has 24 inputs and 24 outputs, every input is connected with a port on the PoKeys. The Leds are connected to the outputs of the PCB. The power on the PCB comes from a different power supply that can supply more Amps.
So if for example you connected the first 24 ports of the PoKeys to the inputs of the PCB then if you activate port 9 on the PoKeys then input 9 on the PCB is triggered and the respective led on output 9 lights up.
If this is not clear to you, please let me know.
Regards, Wendy