hi jeehell.
Yes I did it in the FMGS, I set the detents values there but FSX didnt accelerate the engines.
Also i disabled the Fly by wire in the AP.FBW module , can that be the cause of the problem?
Regards, and thanks!
Adonis
Printable View
hi jeehell.
Yes I did it in the FMGS, I set the detents values there but FSX didnt accelerate the engines.
Also i disabled the Fly by wire in the AP.FBW module , can that be the cause of the problem?
Regards, and thanks!
Adonis
Hi,
Stupid questions, but it already happened: are the engines running?
Also, in AP/FBW module, did you select an aircraft in the dropdown list?
Why did you disable the FBW?
JL
Hi JeeHell,
I have the same problem of adonis martinez but with FS9. I configure correctly the detents in FMGS.
And I have another big problem: with the rotation of V/S encoder the displays and leds of my cockpit (SIOC system) to light up in random mode.. It happened also with the V/S rotary on the screen.
Bye
Umberto VR
Hi,
I forget the last thing: with the last version of FMGS 19.2 on my cockpit the Voltmeter displays of battery don't work (SIOC system). Before with FMGS version 18 they worked correctly.
I use FS9, FSUIPC 3.99, SIOC 3.5
Thank you for great work and support..
Bye
Umberto VR
Hi Jeehell.
there is no more stupid question that the one that is never done ;)
Yes both engines are running and I selected the plane from the list as usual in the FBW.
I disabled the fly by wire because for some reason when it is checked my airplane is uncontrolable, so the raw joystick input solves the problem also the autopilot engaged is not able to control the plane.
Do you know if there is any known problem if FSx service packs are installed?
thanks
Adonis
Hi,
The throttles not spooling the engines is a first. Adonis, what version of FSUIPC do you use? I had troubles with the last one, and I stick to V4.6 for the time, maybe that is a clue for you.
Also, what aircraft are you two using? iFDG or PA, or another one?
What's weird is that you said the EW/D correctly moves the white circle on the N1 display!? This means to me that either the AP/FBW module is not working or there is a problem with FS...
As for FSX, I use a version with both SPs installed, so it is not a problem.
Concerning SIOC and Voltmeters displays, I recently rewrote completely the SIOC handling, and I think I forgot to add that feature. I'll look at that for next version.
JL
Hi JL,
I use the A320 for FS9 IFDG inserted into the folder of the latest version 19.2 of FMGS. My throttle levers are two separate entities with two potentiometers connected via the analog inputs of the expansion card opencockpits and calibrated with your FMGSconfig.exe
For the problem of Vertical Speed encoder that turns on randomly all displays and outputs of my cockpit have discovered what may be? With version B18 did not happen.
Thank you very much for your patience
Umberto VR
Umberto,
Did the SIOC axis work in versions earlier than B19? on the E/WD, are the white circle moving correctly on the N1 gauge when you move the THR LVRs?
For the VS encoders, I will try to check a cuople things, but it's weird. Did you re-apply configuration when upgrading to B19.2?
Adonis, what version of FSUIPC do you use? I noticed I had troubles with v4.7, so I stick to v4.6 for the time.
JL
Hi JL,
yes the SIOC axis work correctly in version B18 but I don't remember if on the E/WD, the white circle moving correctly on the N1 gauge when I move the THR LVRs. In these days I'll try again...
I might have found the problem of Vertical Speed. Its value is sent only to the fourth displays and not to others. So I think that the system goes crazy.
The value of the other three displays is always 0.
The fifth display, the minus sign, is working properly
This is a small text of IOCP console:
8=50 - FCU_VS_DISP4
8=40 - FCU_VS_DISP4
8=30 - FCU_VS_DISP4
8=20 - FCU_VS_DISP4
8=0 - FCU_VS_DISP4
8=-10 - FCU_VS_DISP4
9=-999998 - FCU_VS_DISP5
8=-20 - FCU_VS_DISP4
8=-30 - FCU_VS_DISP4
8=-40 - FCU_VS_DISP4
8=-60 - FCU_VS_DISP4
8=-70 - FCU_VS_DISP4
8=-80 - FCU_VS_DISP4
8=-70 - FCU_VS_DISP4
8=-80 - FCU_VS_DISP4
8=-100 - FCU_VS_DISP4
I hope this help you...
Umberto VR
thx Umberto, I will look at that more precisely.
Keep me posted for the THR LVRs.
JL
hi i am not able to download your fmgs19 software can you give me a working link
thank you...
luca...
Hi,
http://www.jeehell.org/A320FMGS_B19.2.zip
Regards,
JL
hi
i tried to download your fmgs 19 beta but after the download it says that the file is corrupted and cant open...
any solution
thank you
lica..
try from here:
http://www.jeehell.cockpitpassion.fr/
Same problem with THR levers.
Latest version 19.2 Axes configured as well as detents.
But there is no response by moving levers all the way except top position (TOGA).
In previous version was ok.
Marcin
Hi Marcin,
Do you use joystick axes or SIOC axes?
JL
Umberto,
I think I fixed the bug with V/S and SIOC, try downloading the SIOCmodule.dll from here:
http://www.jeehell.org/SIOCmodule.zip and put it in the "FMGS Server" and "OVHD" folders (replace the old one).
JL
Hi JeeHell and really thanks for share your amazing work.
i'm using the last version of FMGS and FSUIPC and i have the same problem as skalarki.
also the joystick axes doesn't responds.
i'm using joystick axes not SIOC axes configured in fmgs.
The Airplane is Wilco in FSX
do you know what i'm doing wrong?
thanks again....
Hi,
Using the WILCO aircraft is probably the reason. It's not supported, try using the iFDG A320 or the PA320.Quote:
Originally Posted by icchio
Also, what version of FSUIPC do you use? It seems better to stay at V4.6 and not upgrade to V4.7 for the time.
JL
thanks jeehell for the quick response i'll try with the airplane you suggested. and also, if i'll found a way, i'll try the downgreed to fsuipc 4.6 tnx again!!
Hi JL,thank you for new modules.
Last night I installed the new sioc.modules and now everything is ok with the V / S. It remains to solve the problem on the voltmeter of battery, but you have already responded. I noticed that the button Galley on the overhead only works in off-mode. To explain: if you click on will not turn off the light off, and if it is turned off the light comes on.
For the thrust levers is a strange thing happened: just set one of them works in reverse. Then I closed and restarted FMGS B19.2 and everything is back to work ...
Now everything is ok!
Thank you for your great support!
Umberto VR
Hi,
Ok I will look at the galley button for next version. As for the LVRs, just to be sure, the FMGS needs to be closed when you setup FMGS config, it is no updated in real time.
JL
Hi JH,
the buttons and switches I have now assigned all, but there is a new problem. The keys Apu Bleed , Apu start and ground spoilers Armed after pressing the button will not start. Using the mouse, it works.
Greetings Micha
Hi Jeehell
I have been making some tests with the software and send you some bug to your report forum topic.
Regarding the levers the same problems remains but I have tried closing the AP/FBW module and set up each lever via FSUIPC in the axis page for each engine and it worked, the plane is fully flyable , engines responds to levers movement. I agree that this is not a correct thing , but I was wondering that this could be a clue because it seems clear that the AP/FBW module might be the key to solve the levers issue.
Best regards
Adonis
Hi jeehell.
I have been making some testing and here are some initial bugs, expect a second post since some A320 pilots are coming home to help me with more testing :-)
BATERY.
When the airplane is energized with the APU the OFF text is not appearing in the battery korrie.
APU.
As far as I was aware of the APU has its own fuel pump, so it should be starting up without the need of powering up a fuel pump in the fuel panel.
HYDRAULICS.
I started up the plane and pressed F8 and the flaps extended without any hydraulic pressure, first that should be happening and a memo should appear in the ECAM.
DRY CRANK
1) In the engine panel I selected CRANK,
2) Manual start switch ON
3) The start valve remains closed in the engine page in the SD.
ENGINE MASTER SWITCH.
The ENGINE MASTER switch in OFF is not turning the engine OFF.
The engine LP valves can be closed by engine master or engine fire button.
ENGINE BLEED PRESURE.
Both engines running, each engine bleed values is not the real value. Engine at full trust should be around 200 psi and it is only showing 34 PSI at the SD.
FUEL SYSTEM.
The amber marks in the fuel pumps at SD shows that the logic is not correct. No explanation why central tanks valves are closing automatically when selecting another fuel pump.
hope this helps.
Best regards
Adonis
Hi
I will look at the swithces bugs.
Concerning the levers, it's hard to tell. Not using the AP/FBW is not a good idea. On several setups it works perfectly. Please make sure you calibratzd the lvrs correctly in FMGs config, it should work. Also, what FSUiPC version and what aircraft are you using?
JL
Hi Jeehell.
Fsuipc is 4.6 , FSX Sp2, and the airplane is IFDG A320 the plane provided with your package.
Adonis
Hi Adonis,
I really don't know what to say, if it worked in earlier versions it should still work now...
Did you try to re-install the FMGS from scratch?
Also did you try to reinstall FSUIPC and/or FSX?
JL
Hi Jeehell,
thanks for the fast reply,
yes I did reinstall everything from scratch , FSX, FSUIPC, and FMGS.
no worries at the time, Im still trying some configurations and investigation a bit more. I will update if I find something else
Best regards
Adonis
Hello Jeehell,
I still have a little problem. I can not hear the call out `s. Do I need to change something in the sound cfg.
Thanks again for your great cockpit software.
Greetings Micha
Hello,
Sometimes it seems there is a bug with the sound module. I hope next version will correct it.
JL
Hello,
Finished latest version:
http://www.jeehell.org/A320FMGS_B20.zip
It mostly corrects I/O modules bugs, but also improves sound module and warnings on the E/WD.
Cheers,
JL
JL, I just downloaded your file for the latest A320, and read the user guide. That has to be one of the BEST guides I have seen written.
I will be trying your software out on a couple of spare computers when I get some spare time. You have, from what I have seen so far, done a brilliant job.
Congratulations................Brian W.
Hi Brian,
Such kind words from a builder like you are really heart-warming!
But I have to admit lately the manual is not exactly up-to-date, I have to add a couple chapters and pictures, and check a few others are not obsolete :oops:
If you have any questions concerning the setup etc... feel free to ask here or by e-mail. I saw on others posts you use FDS SYS boards, IOCards and CPFlight FCU.
The first two are already functionnal through software present in the package (direct communication without any scripting to do) and for the CPflight FCU, I'm currently writing a driver which is almost fully operational, but not in the public package, if you're interested to test it, i'll be glad to include you in that process!
Cheers,
JL
Gooday JL, I will be glad to do some testing. Especially on the CPFlight FCU. It may take a while to get ime to set this up, but I think your software has some great possibilities.
Regards..............Brian W.
PS. will send you an email shortly.
Hi. Great work you are doing!
I'm new to your software and just downloaded the latest. I wanted a more complex FMGS for my flightsim.
I'm running FSX SP2 in Win7 x64, Registred FSUIPC 4.60a. And plan to use Project Airbus A320.
But I seem to have problem with connecting FMGS server to FSUIPC. I do not use a network, run all on one computer. I read somewhere that it might be a firewall problem, where can I go and open for all ports?
Thor
Got i t working now. On the 4th reinstall of FSUIPC.. Just like that.. This is great!Quote:
Originally Posted by BA_redcap
Hi,
OK glad you could solve it by yourself, I just came home and saw your post now...
Cheers,
JL
Hi,
I am new here... so "Hello" to everyone and a big "thank you" to JL for this very nice work. Since I understand this thread as a sort of feedback thread regarding the latest version 20 I would like to add some comments as well. I am pretty happy with the first tests without any SIOC. However, I also have one major problem with the THR LVRs. As discribed by others the white cycle with the "target dots" are working but the engines dont accelerate. In my case the green markers dont move at all. In case I don't run the AP/FBW the problem is gone and the engines spool up or down to the "white target N1" as they should. But without FBW its no Airbus...Any idea?
Im running FSX with FSUIPC 4.6a and the ifdg 320 as recommended and using the joystick-axis.
Cheers,
Rob
Hi Rob,
First welcome here ;)
Concerning your THR LVRs issues, I need more details on your setup, especially the FMGS Config setup. Did you declare there your axes and save the configuration? how many THR LVR axes used?
Are you using the AP/FBW on the same computer as FS and FMGS Server? Did you check the option "disable FBW"?
Did you try to reinstall FSUIPC?
Is it on the ground?
If you have any other detail I cannot think of... Most people don't have this issue so hard to tell...
JL