Hallo Fritz,
TOPCAT communicates with P3D via WideFS. It sends the fuel and weights to the aircraft. Then you load these in FMGS in the INIT 2 page.
Best regards,
--pim
Printable View
Hallo Fritz,
TOPCAT communicates with P3D via WideFS. It sends the fuel and weights to the aircraft. Then you load these in FMGS in the INIT 2 page.
Best regards,
--pim
Thanks for the reply Pim. Then I’m afraid TOPCAT would not be a workaround for this problem.
It seems that Teamviewer disrupt the fuel load from P3D to FMGS. That’s why I ask, if TOPCAT communicates direct to FMGS.
Hallo Fritz,
I don't understand. I use TeamViewer to start P3D + FMGS from my office PC. On my office PC, I also have PFPX + TOPCAT + WideFS. From there I send the weight and fuel to P3D. This always has worked, also with my previous B738 sim using ProSim737. I actually see the plane move a little bit when the weight and fuel get loaded.
Best regards,
--pim
Hi Pim,
I guess it depends on the system configuration. On my main computer are only P3D and the necessary modules of FMGS ( such as FMGS Server ) installed . All other modules as OVHRD , MCDU_CPT , MCDU_FO etc. are distributed to three additional computers .
With TeamViewer I start all applications on the different computers. This is necessary because I cannot fully see the monitors in the cockpit. I start FMGS first on the main computer and then the other. I began from Cold and Dark, turn the batteries on and then try to start the APU. The APU would not start because the tanks are empty. I have to shut down and restart FMGS on the main computer. Then the tanks are refilled.
As I understand JeeHell, this problem is caused by TeamViewer.
Thanks OmniAtlas
Hi,
I do not recommend using teamviewer.
There is a known bug (I cannot find why yet) that causes simconnect crash with FSX / P3D.
Prefer using VNC on your local network.
JL
Is there an alternate (one click executive) solution to run applications on a remote computer
I found this link to remotely shutdown the Windows computer --
http://www.howtogeek.com/109655/how-...rt-windows-pcs
I would like to start the programs, and the computer without using a remote login viewer program such as VNC, teamviewer.
Hello JL,
I use Topcat over network and VNC, and have the same problems with fuel load like OmniAtlas. The most fuel is load in the right tanks.
Regards
Micha