prosimparts radio modules

These radios are to be connected and bring alive with these cards:

Attachment 7413

The green modules are the OC modules and the little one down under is the BODNAR PRICES:

- 3 displaycards - Open Cockpits = € 96.57 (total)
- 1 Mastercard - Open Cockpits = € 64.95
- 1 USB expansion card - Open Cockpits = € 43.95
- 1 bodnar BBI32 card = € 42.63

I use the PROSIM 737 software and this recognize all at once. Just wire and tuning.

Regards,
​Ed

Ed

Some encoders cannot be read properly with OC Mastercards. Have Prosimparts confirmed that their encoders will interface ok?

David

The Dual Rotaries ProSim provides will not interface directly with O/C Mastercards. They'll work but I think the issue was they sent two pulses per detent.

I needed to get two O/C Rotary Encoders cards and reprogram the Encoder cards chip with this code to get the Dual Rotaries to work.

Hi

You are right. Thats Why I use the bodnar. The modules you seeing are the display modules of OC. The Bodnar is responsible for the buttons and encoders.

Regards,
Ed

Ed

Great, pleased to see that you are ahead of the game :D Nolatron, thanks for the info

David

How are the Bodnar cards with the rotaries? I tried using a Pokey56 I had and still couldn't get them to function correctly. They kept jumping pulses I think with each detent with these particular dual-encoders.

Hi Shaun,

It can be done with Pokeys of Wendy too. I use Pokeys for the FLT ALTITUDE and the LAND ALT rotaries. Easy to setup with the Pkeys software. For this it is not needed to use other hardware.

Good luck,
Ed

Quote:

---

Originally Posted by nolatron

He also offers a complete pedestal panel kit but that is just the panels and what peter bought.

---

Exatcly! :-) That is the difference between the Basic Series and Standard Series.

Quote:

---

Originally Posted by nolatron

I bought the overhead kit that includes everything.

---

What did you do with the annunciators? They do not seem to be included.
Home made?

Cheers Peter

Quote:

---

Originally Posted by BuildABoeing

What did you do with the annunciators? They do not seem to be included.
Home made?

Cheers Peter

---

Danhiel told me he'd ship everyone who the OVHD kit a set of annuniciators once he completed them. Sounds like he's hoping to have them by the end of the month. So I'm waiting on those on a few small pieces missing from the kit.

Quote:

---

Originally Posted by cuevision

Hi Shaun,

It can be done with Pokeys of Wendy too. I use Pokeys for the FLT ALTITUDE and the LAND ALT rotaries. Easy to setup with the Pkeys software. For this it is not needed to use other hardware.

Good luck,
Ed

---

Hi Ed,

How did you get these working? I also use the ProsimParts Encoders with the Pokeys cards but the digits go crazy :(
Does it matter to what port of the card i connect the encoders?

Thanks in advance.

Groet Corné