Multi- USB Expansion cards
hi.
I'm trying to get both my USB expansion cards to work in Controlador.exe on 1 pc but having some issues.
1 usb exp with 2 M/C for the MIP... USbdevice=09
1 usb exp with 3 M/C for the overhead... usbdevice=30
How do you test or use controlador to test both the usb cards together.
If I hit test all only the MIP led's light up. If I remove the usb cable for the mip exp card, and then hit test all, all the led's light up on the overhead.
Is there any way to to hit the test all button and all the led's light up on the mip and the overhead instead of trying them out indivisually.
I' tried playing aorund with the controlador.ini file but couldn't get it to wotk.
The manual says you can use multi usb expansion cards in controlador. just wondering how do you set it up.
thanks.
Re: Multi- USB Expansion cards
Quote:
Originally Posted by
Air Canada
How do you test or use controlador to test both the usb cards together.
You cannot. It will only test Device 0.
The only way is to test 1 USB exp card first and then interchange the logical DEVICE numbers of your USB expansion card (in sioc.ini and in your SIOC code) and then test the other.
Re: Multi- USB Expansion cards
Quote:
Originally Posted by
kiek
You cannot. It will only test Device 0.
The only way is to test 1 USB exp card first and then interchange the logical DEVICE numbers of your USB expansion card (in sioc.ini and in your SIOC code) and then test the other.
O ok... thanks.. Currently what I'm doing is testing 1 usb at a time.
all inputs and outputs seem ok so far..
thanks..
