Printable View
sprayed with airbus grey-blue
http://flatlandpilots.nl/coppermine/...2/DSCF1652.jpg
sizes:
outside diameter: 10 mm.
inside diameter 7.1 mm. / 3.1 mm. deep.
hole: 4 mm. total height: 6 mm
The top of the duz is 3mm. raised above the panel
The screw top is 1mm. below the duz top.
Sweet,
Cheers, Gwyn
They look great Flatland, Did you have to change the bit for the rounded/beveled top ?. Would you like to share the dxf or gcode for um..
Cheers
Rich..
the dxf file are 3 centred circles with a diameter of 4, 7.1 and 10 mm.
yes I had to change the bit, but thats no problem.
for rounding I use this one
http://www.homedepot.ca/wcsstore/Hom...c6775c7b_4.jpg
http://www.homedepot.ca/webapp/wcs/s...k=P_PartNumber
(and modified it by cutting off the "guide" / lower part)