Boeing 737-800 Flightdeck (AUS)

Hey guys, it me again!

I'm going to try one more time. I can't believe I'm doing this but I'm letting this puppy go for $5000

I will also take inquiries on parts sold individually. I don't have the room for this anymore and my hobby has taken me in another direction.

For those wanting to get into this hobby. Here's a cheap opportunity to get started.

SHELL
Made from Pine and MDF.
Painted internally throughout.
Constructed in 6 sections for easy breakdown.
6 x Standard Windows
4 x Eyebrow Windows
2 x Map Lights
2 x Side Compartments with 2 Drink Holders and 2 Charts Holders on each
Carpeted (Inlcluded with sale of shell)
2 x Car Seats mounted on rails
2 x CH Yokes mounted on steel poles and bolted down
Smoke Detector
Overhead Light

MIP
Soild Aluminum Construction
2 x 19” Wide LCD Displays
1 x 15” LCD Display
1 x 5” LCD Display
Landing Gear Control Handle
1 x Opencockpits CDU
1 x Opencockpits Flaps Gauge
2 x FDS AFDS Controls
17 x FDS Annunciators
7 x Toggle Switches
3 x Missile Covers
7 x Rotary Switches
12 x Knobs
Yoke Control Switch with interface
MIP Overhead LED Light Strip

Glareshield
2 x Opencockpits EFIS Panels
Homemade MCP Panel
Includes:
6 x Opencockpits 7 segment Displays
6 x Rotary Encoders
6 x Knobs
14 x Panasonic Push Buttons with LED’s
3 x Switches
3 x Push Buttons
Requires:
V/S Wheel
A/T Light
A/P Disengage Switch
Glareshield Overhead LED Light Strip

Forward Overhead
Constructed from Steel and Aluminum. With Dzus fastners.
All IOcards are mounted on rear of overhead. Overhead can be removed and run externally for testing or simply hung from sim.
95% Operational !
3 x Opencockpits Mastercards
1 x Opencockpits USB Expansion Cards
2 x Opencockpits Displays2 Cards
101 FDS Annunciators
72 x Toggle Switches (High Quality, worth $35 ea)
10 x Missile Covers
12 x Rotary Switches
13 x Knobs
2 x Rotary Encoders
2 x Opencockpits 7 Segment 5 Digit Displays
Requires:
Gauges
Lightplates
Fuel Transfer Switch

Rear Overhead (Included with purchase of Forward Overhead)
Constructed from Steel and Aluminum. With Dzus fastners.
Construction only just started but all ready to fit electronics.
14 x FDS Annunciators
2 x Toggle Switches
1 x Missile Cover
2 x Push Buttons

Center Pedistal
Constructed from Steel and Aluminum. With Dzus fastners.
Operational Panels:
Comm1 / Comm2
Nav1/ Nav2
ADF1 / ADF2
Transponder
Online Flying Panel
2 x Audio Panels (Not Wired)
Includes:
8 x Opencockpits 7 Segment 6 Digit displays
3 x Opencockpits 7 Segment 4 Digit displays
28 x Pots
11 x Rotary Switches
38 x Knobs
5 x Push Buttons
11 x Toggle Switches
16 x Opencockpits Push Buttons with LED’s
2 x Dual Concentric Switches

Electronics
4 x Opencockpits Mastercards
1 x Opencockpits USB Expansion Cards
6 x Opencockpits Displays2 Cards
1 x Opencockpits USB Relays Card
1 x Opencockpits USB Servo Card
1 x Opencockpits USB Keys Card
6 x USB Cables
2 x Power Supplies
2 x FDS Mastercaution/ Fire lights
2 x FDS Six Pack Annunciators

Computers
1 x Flight Sim Computer (P3.2)
1 x Online Computer (P1.8)
1 x Instructor Computer (P2.4)
1 x Captains PFD & ND Computer (P1.8)
1 x FO PFD & HD Computer (P1.8)
1 x ECAS Computer (P1.2)

Displays
19” Philips LCD Display (FS9/FSX Visuals)
19” LCD Touch Screen (Instructor)
10” LCD Touch Screen with TV Tuner (Online/Checklists)

Other
Computer Control Panel
5 Power Boards
3 x Mice
4 x Keyboards

Audio
Samsung 5.1 Surround System (FS Audio)
4 x Speakers
1 x Sub Woofer
Other
2 x Overhead Speaker (Bitching Betty)
Flightcom 4 place Aircraft Intercom (2 Places fitted)
Telex Airman 750 Heaset
ATC Overhead Speaker

Extras
Real Oxy Mask
3000ft (Approx) Wire


Regards,
Brad Heller
Maitland, NSW, AUS

http://www.mycockpit.org/forums/atta...6&d=1262868145
http://www.mycockpit.org/forums/atta...7&d=1262868145
http://www.mycockpit.org/forums/atta...8&d=1262868213
http://www.mycockpit.org/forums/atta...9&d=1262868213
http://www.mycockpit.org/forums/atta...0&d=1262868213
http://www.mycockpit.org/forums/atta...1&d=1262897278

can u email me some pics:

ShannonBaker88@gmail.com

I got a new mining job and so will have some dough in about 4-8 weeks.

Hi Brad,

can you post some pics of your setup?

Cheers
Diego

Found some pics that are about 6 months old.

Some other details I'd like to point out:

- The Throttle has Thruster and Reverser Knobs now and is painted.
- All toggles switches are of Aircraft grade acquired from a source in the US.
- Some minor upgrades have been made since then.
- Aircraft grade headset included with the real aircraft intercom wired so you can fly online and talk to your co-pilot or ATC.
- All Opencockpit IOCards have been professionally built!
- I'll even thrown in a $700 portable Airconditioner for those who take the whole lot.

Told you I am giving this thing away ($5000).

Brad

p.s. I should point out that I'm getting out of this hobby all together so there will be no support after purchase. Plenty of help here on MyCockpit though!

After a few inquiries, I need to mention a couple of things:

- The sim is mainly hand made. But don't let that put you off! Its made of a high quality with Steel and Aluminum panels. I am a Aircraft technician by trade and have used my skills on this sim.

- Shell is not available for shipment overseas. Much too heavy for that.

- Postage must be paid by buyer.

- If your one of the many who has expressed interest in buying this sim as a whole, get in quick as I'm getting many more inquiries for parts.

Thats it for now!

Brad.

After no solid inquiries about buying the sim as a whole I have regretfully decided to break the sim up.

So let those part inquiries flood in!

Brad.

Brad, you have PM...

Could I please have those inquiring on certain parts return my PM's as I have others interested in the same parts.

I have the decency of returning your inquiries so please answer mine.

Thank You!

Brad.

Quote:

---

Originally Posted by B738sim

Could I please have those inquiring on certain parts return my PM's as I have others interested in the same parts.

I have the decency of returning your inquiries so please answer mine.

Thank You!

Brad.

---

Seems to be a common problem at the moment :mad:

I thank you all for your inquiries but due to the VERY painful process of trying to negotiate prices and the individuals that were deliberately trying to deceive me on quotes I have decided to withdraw the sim from sale. This includes inquiries on parts. All monies that have changed hands have been returned. For those who were genuine, I apologize but the minority have ruined it for the rest.

Brad.