PM and active sky

I again,

Did someone try ACTIVE SKY with Project Magenta ?

Some minutes after the take off, when Active Sky load the again the weather, the aircraft speed going to 0.....

I don't understand why ...

Did someone have the same issue ?

Active Sky or any other weather software interacts with FS9 or FSX and not with Project Magenta as such.

The "zero" speed can and does happen at times when the WX changes drastically , ie wind direction or speed there are settings in both Active SKy and FSUIPC to suppress this happening.

What you need to bear in mind is that although your displays show a "zero" speed you are actually still moving and normally after about 60 or 90 seconds the situation resets it self and you are back in normal mode.

yes its annoying but not really a problem as such..

Rgds
Peter

It doesn't work like this on my computer. The speed goes to 0, and after some minutes, the airplane goes down :D
Even after 10 minutes, the speed is steel at 0.

The only things I found, is to shut off the mcp, and everything go back...

Does the MCP indicated airspeed also go to "0"??

This is weird, ive never had this problem..
Peter

Quote:

---

Originally Posted by slider

It doesn't work like this on my computer. The speed goes to 0, and after some minutes, the airplane goes down :D
Even after 10 minutes, the speed is steel at 0.

The only things I found, is to shut off the mcp, and everything go back...

---

Are you flying in icing conditions (or near them) without all your anti-ice systems turned on? This can lead to very erratic airspeed indications (sudden drops to zero do happen) in FS due to the rudimentary way the simulation handles icing and its effects.

Quote:

---

Originally Posted by Peter Nielsen

Does the MCP indicated airspeed also go to "0"??

---

No, the MCP indicate the correct speed

Quote:

---

Originally Posted by Peter Nielsen

Are you flying in icing conditions (or near them) without all your anti-ice systems turned on? This can lead to very erratic airspeed indications (sudden drops to zero do happen) in FS due to the rudimentary way the simulation handles icing and its effects.

---

I use the real weather, and in, that true, I never try to turn on the anti-ice system (I don't use the overhead now). I will try this week end !

Thanks for your ideas.

And PITOT HEAT.... this can also be the root of the problem..

Good luck,
Peter

Quote:

---

Originally Posted by slider

No, the MCP indicate the correct speed



I use the real weather, and in, that true, I never try to turn on the anti-ice system (I don't use the overhead now). I will try this week end !

Thanks for your ideas.

---

Hi,

yes you need to put on Anti Ice (Wing),
actually this is not as in real, nut the pitot heats funktion is not correct implemented in FS.

I figured out that Anti Ice Wing is the only button/function which prevents the pitot heat for icing, (and loosing the speed indication)

Best regards
Jan

Quote:

---

Originally Posted by slider

Did someone try ACTIVE SKY with Project Magenta ?

---

I've always used Active Sky with PM.

Quote:

---

Some minutes after the take off, when Active Sky load the again the weather, the aircraft speed going to 0.....

---

Sounds like you forgot to switch on the Pitot Heat ("probe heat" on a Boeing airliner) and are getting the dynamic pressure dropping to zero because of icing.

Pete

Thanks for all your answers.

That's true, I never use this "pitot heat" or "probe heat".
How does it work ? I mean, do I need to use Project Magenta Overhead Panel ?
How can I switch it to on ?