Re: OC Master and USB cards
In the controlador software does it show usb running and connected? Also you must put a line in the the ini file telling the software how many master cards you have. You must connect MC to J1 on the usb expansion card.
Re: OC Master and USB cards
Quote:
Originally Posted by
737NUT
In the controlador software does it show usb running and connected? Also you must put a line in the the ini file telling the software how many master cards you have. You must connect MC to J1 on the usb expansion card.
Hi, yes it say that the usb is running, also in the .ini file it says there is one m/c and i connect it to plug J1
thanks
Re: OC Master and USB cards
Hi Jason
You have to change the sioc.ini to tell the software how many mastercard you are running. In a few hours I will post 4 sioc.ini for 1 to 4 mastercard. It will be in the Opencockpit page under software on my website. So you will only have to copy my sioc.in to the folder where you put the software from opencokcpits.
Here my page www.fight.nrick.net
Cheers Norbert
PS need more help just ask.
Re: OC Master and USB cards
so here is the page where I put the sioc.ini files
http://www.flight.nrick.net/html/software.html
Cheers Norbert
Re: OC Master and USB cards
thanks i will have a lok and see if this helps, do you need to have this for the controlador to show the inputs correctly?? just trying to get my head around how the software works
Re: OC Master and USB cards
Jason
I stand to be corrected, but am unaware that SIOC.INI has any impact on Controlador. SIOC.INI is used by SIOC to get its initial parameters and is used when running/compilig scripts. If at this stage, you just wish to test all is ok and are using Controlador then you do not need to do anything with SIOC.INI. I suggest you post your controlador.ini file here and we will take a look at it. Also did you buy the cards in built or kit form
Regards
David
Re: OC Master and USB cards
here is the .ini
[ fichero de configuracion para el programa CONTROLADOR ]
[ Configuration file for CONTROLADOR ]
[ Uso de Expansión USB ]
[ Iocard Master expansion USB ]
USB=yes
[ Múltiples USBs ]
[ Non unique USB ]
MUSB=No
[ Número de periférico para el USB ]
[ USB Device number ]
deviceUSB=2048
[ Número de A/D a usar de la placa de Expansión USB ]
[ A/D used by Iocard Master expansion USB ]
USB_AD=1
[ Puerto donde se encuentra conectada la IOCard Master ]
[ Iocard Master, parallel port address ]
Port=$0378
[ Modo compatible yes/no , necesita cable especial ]
[ Compatibility Mode yes/no, needed special cable ]
FullCompatible=No
[ Utiliza placa de expansión yes/no]
[ Use Expansion card yes/no]
Expansion=no
[ Activar en modo SIMULADOR yes/no]
[ Use simulated card yes/no]
simulator=yes
[ Numero de tarjetas Master inter-conectadas ]
[ Number of connected master cards ]
NCards=1
[ Refresco de poll tarjetas Master ]
[ Master cards refresh ]
MasterRefresh=10
Filter=yes
[ End of File ]
they were built from kits.
Thanks
jason
Re: OC Master and USB cards
Jason
The only difference I can see is on the line "simulator=yes"
I have controlador running on two different machines, however, I have this line set to simulator=no
Try this and see what happens
David
Re: OC Master and USB cards
i have tried it with no, makes no difference, stil get the same behaviour