PDA

View Full Version : Problem since Beta3.0 installed



lineman55
04-23-2005, 02:05 PM
Hi Alan,
I dropped the 3.0 ver exe into my existing Phidgets folder and everything comes up normal but some of my switches/LEDS no longer work.
They show the True/False when I move them ok in the PH VALUE COLUMN but noT the FS VALUE COLUMN .
EG...ENGINE1_FUEL_LEVER. ON= TRUE(PH2VALUE) 0 in the FSVALUE (it should be 16384) nothing changes here. I went into the FSELEMENT to edit and everything here shows ok for assignments.

Half of my LEDS are assigned still but nothing lights even if i invert.

When I shut down 3.0 and activate the older version everything back to normal.
Do you have an idea what happened here?
Thanks
James

cpeckinpaugh
04-24-2005, 05:48 AM
James,
I am getting the same kind of thing happening.
I've noticed on mine that some of the offsets are not being assigned even though the switch shows true/false and the values show 1/0. The offset and length fields are blank. Unassigning and re-assigning does not work,, Ver2.1.1 works fine.
Cam

alandyer
04-25-2005, 03:56 AM
Looks like we have problem.
Will investigate and fix.

lineman55
04-25-2005, 10:59 AM
Thanks Alan :)

lineman55
04-27-2005, 04:59 PM
Hello Alan,
All of a sudden my flaps arnt reading at all in the older version.
I tried switching sensor plugs on the 8/8/8 board and still nothing.
Everything else seems ok still.
Slowly falling apart here. :cool:

Throttle and spoilers working ok.

Kind regards
James

Target
04-29-2005, 11:03 PM
Having the same offset problem here: no offset assignment in Beta 3.0 (in my case the GEAR_HANDLE digital input). Works fine in 2.1.1 though... :(

Target.

alandyer
05-04-2005, 06:37 PM
A fix is on the way.
I am in middle of testing right now.