PDA

View Full Version : CDU Nav Data deselect area doesn't work



Ray Proudfoot
04-02-2006, 04:57 AM
I'm tying to deselect areas in the nav data I never fly in such as Sth
America and Pacific. The Nav Data option on the Index page has a Areas
Select option that displays the 6 areas and currently they're all active.

I would have thought that pressing the button against an entry would
deselect it but it doesn't. I just see Inop displayed.

Does anyone know if this is meant to work and if so - how?

I'm using build 372 of the CDU.

--
Regards,

Ray
Cheshire, England

Ray Proudfoot
04-04-2006, 12:29 PM
Anyone else with this problem???



"Ray Proudfoot" wrote in message
news:406643.81263@wb.onvix.com...
> I'm tying to deselect areas in the nav data I never fly in such as Sth
> America and Pacific. The Nav Data option on the Index page has a Areas
> Select option that displays the 6 areas and currently they're all active.
>
> I would have thought that pressing the button against an entry would
> deselect it but it doesn't. I just see Inop displayed.
>
> Does anyone know if this is meant to work and if so - how?
>
> I'm using build 372 of the CDU.
>
> --
> Regards,
>
> Ray
> Cheshire, England
>

Bill Trinidad
04-04-2006, 02:47 PM
Hi Ray,

I use the NavExtract with the screen shown on PM's NavData page and it works

great.

I have not tried ( I didn't even know it was possible ) to use any buttons
on the CDU.

Cheers,

Bill


"Ray Proudfoot" wrote in message
news:407286.81263@wb.onvix.com...
> Anyone else with this problem???
>
>
>
> "Ray Proudfoot" wrote in message
> news:406643.81263@wb.onvix.com...
>> I'm tying to deselect areas in the nav data I never fly in such as Sth
>> America and Pacific. The Nav Data option on the Index page has a Areas
>> Select option that displays the 6 areas and currently they're all
active.
>>
>> I would have thought that pressing the button against an entry would
>> deselect it but it doesn't. I just see Inop displayed.
>>
>> Does anyone know if this is meant to work and if so - how?
>>
>> I'm using build 372 of the CDU.
>>
>> --
>> Regards,
>>
>> Ray
>> Cheshire, England
>>
>

Ray Proudfoot
04-04-2006, 03:06 PM
Thanks Bill. I've downloaded and run NavExtract. I don't understand the
point of the buttons on the CDU because even after deselecting Sth America
in NavExtract that area still shows as Active in the CDU.

Perhaps another thing that Enrico has to implement when he has the time.

Cheers.


"Bill Trinidad" wrote in message
news:407328.81263@wb.onvix.com...
> Hi Ray,
>
> I use the NavExtract with the screen shown on PM's NavData page and it
> works
>
> great.
>
> I have not tried ( I didn't even know it was possible ) to use any
buttons
> on the CDU.
>
> Cheers,
>
> Bill
>
>
> "Ray Proudfoot" wrote in message
> news:407286.81263@wb.onvix.com...
>> Anyone else with this problem???
>>
>>
>>
>> "Ray Proudfoot" wrote in message
>> news:406643.81263@wb.onvix.com...
>>> I'm tying to deselect areas in the nav data I never fly in such as Sth
>>> America and Pacific. The Nav Data option on the Index page has a Areas
>>> Select option that displays the 6 areas and currently they're all
> active.
>>>
>>> I would have thought that pressing the button against an entry would
>>> deselect it but it doesn't. I just see Inop displayed.
>>>
>>> Does anyone know if this is meant to work and if so - how?
>>>
>>> I'm using build 372 of the CDU.
>>>
>>> --
>>> Regards,
>>>
>>> Ray
>>> Cheshire, England
>>>
>>
>

Bill Trinidad
04-04-2006, 03:59 PM
Hi Ray,

I shall try to add and then remove SA the next time I fly, and will get back

to you.

Cheers,

Bill

"Ray Proudfoot" wrote in message
news:407329.81263@wb.onvix.com...
> Thanks Bill. I've downloaded and run NavExtract. I don't understand the
> point of the buttons on the CDU because even after deselecting Sth
America
> in NavExtract that area still shows as Active in the CDU.
>
> Perhaps another thing that Enrico has to implement when he has the time.
>
> Cheers.
>
>
> "Bill Trinidad" wrote in message
> news:407328.81263@wb.onvix.com...
>> Hi Ray,
>>
>> I use the NavExtract with the screen shown on PM's NavData page and it
>> works
>>
>> great.
>>
>> I have not tried ( I didn't even know it was possible ) to use any
> buttons
>> on the CDU.
>>
>> Cheers,
>>
>> Bill
>>
>>
>> "Ray Proudfoot" wrote in message
>> news:407286.81263@wb.onvix.com...
>>> Anyone else with this problem???
>>>
>>>
>>>
>>> "Ray Proudfoot" wrote in message
>>> news:406643.81263@wb.onvix.com...
>>>> I'm tying to deselect areas in the nav data I never fly in such as Sth
>>>> America and Pacific. The Nav Data option on the Index page has a Areas
>>>> Select option that displays the 6 areas and currently they're all
>> active.
>>>>
>>>> I would have thought that pressing the button against an entry would
>>>> deselect it but it doesn't. I just see Inop displayed.
>>>>
>>>> Does anyone know if this is meant to work and if so - how?
>>>>
>>>> I'm using build 372 of the CDU.
>>>>
>>>> --
>>>> Regards,
>>>>
>>>> Ray
>>>> Cheshire, England
>>>>
>>>
>>
>

Enrico Schiratti
04-13-2006, 10:11 AM
I think the NAV DATA SELECT just shows which areas are active after
NavExtract has been used... the > next to the areas is thereby out of
place.

Ciao

Enrico

"Bill Trinidad" wrote in message
news:407336.81263@wb.onvix.com...
> Hi Ray,
>
> I shall try to add and then remove SA the next time I fly, and will get
> back
>
> to you.
>
> Cheers,
>
> Bill
>
> "Ray Proudfoot" wrote in message
> news:407329.81263@wb.onvix.com...
>> Thanks Bill. I've downloaded and run NavExtract. I don't understand the
>> point of the buttons on the CDU because even after deselecting Sth
> America
>> in NavExtract that area still shows as Active in the CDU.
>>
>> Perhaps another thing that Enrico has to implement when he has the time.
>>
>> Cheers.
>>
>>
>> "Bill Trinidad" wrote in message
>> news:407328.81263@wb.onvix.com...
>>> Hi Ray,
>>>
>>> I use the NavExtract with the screen shown on PM's NavData page and it
>>> works
>>>
>>> great.
>>>
>>> I have not tried ( I didn't even know it was possible ) to use any
>> buttons
>>> on the CDU.
>>>
>>> Cheers,
>>>
>>> Bill
>>>
>>>
>>> "Ray Proudfoot" wrote in message
>>> news:407286.81263@wb.onvix.com...
>>>> Anyone else with this problem???
>>>>
>>>>
>>>>
>>>> "Ray Proudfoot" wrote in message
>>>> news:406643.81263@wb.onvix.com...
>>>>> I'm tying to deselect areas in the nav data I never fly in such as
Sth
>>>>> America and Pacific. The Nav Data option on the Index page has a
Areas
>>>>> Select option that displays the 6 areas and currently they're all
>>> active.
>>>>>
>>>>> I would have thought that pressing the button against an entry would
>>>>> deselect it but it doesn't. I just see Inop displayed.
>>>>>
>>>>> Does anyone know if this is meant to work and if so - how?
>>>>>
>>>>> I'm using build 372 of the CDU.
>>>>>
>>>>> --
>>>>> Regards,
>>>>>
>>>>> Ray
>>>>> Cheshire, England
>>>>>
>>>>
>>>
>>
>

Ray Proudfoot
04-14-2006, 04:31 AM
Hi Enrico,

I don't think this feature is working as you describe. Having used
NavExtract to deselect Sth America I restarted the CDU and the Areas Select

screen still shows Sth America as active. It's not a major issue - I just
wanted you to be aware of how it's working.

Cheers.



"Enrico Schiratti" wrote in message
news:409587.81263@wb.onvix.com...
>I think the NAV DATA SELECT just shows which areas are active after
> NavExtract has been used... the > next to the areas is thereby out of
> place.
>
> Ciao
>
> Enrico
>
> "Bill Trinidad" wrote in message
> news:407336.81263@wb.onvix.com...
>> Hi Ray,
>>
>> I shall try to add and then remove SA the next time I fly, and will get
>> back
>>
>> to you.
>>
>> Cheers,
>>
>> Bill
>>
>> "Ray Proudfoot" wrote in message
>> news:407329.81263@wb.onvix.com...
>>> Thanks Bill. I've downloaded and run NavExtract. I don't understand the
>>> point of the buttons on the CDU because even after deselecting Sth
>> America
>>> in NavExtract that area still shows as Active in the CDU.
>>>
>>> Perhaps another thing that Enrico has to implement when he has the
time.
>>>
>>> Cheers.
>>>
>>>
>>> "Bill Trinidad" wrote in message
>>> news:407328.81263@wb.onvix.com...
>>>> Hi Ray,
>>>>
>>>> I use the NavExtract with the screen shown on PM's NavData page and it
>>>> works
>>>>
>>>> great.
>>>>
>>>> I have not tried ( I didn't even know it was possible ) to use any
>>> buttons
>>>> on the CDU.
>>>>
>>>> Cheers,
>>>>
>>>> Bill
>>>>
>>>>
>>>> "Ray Proudfoot" wrote in message
>>>> news:407286.81263@wb.onvix.com...
>>>>> Anyone else with this problem???
>>>>>
>>>>>
>>>>>
>>>>> "Ray Proudfoot" wrote in message
>>>>> news:406643.81263@wb.onvix.com...
>>>>>> I'm tying to deselect areas in the nav data I never fly in such as
> Sth
>>>>>> America and Pacific. The Nav Data option on the Index page has a
> Areas
>>>>>> Select option that displays the 6 areas and currently they're all
>>>> active.
>>>>>>
>>>>>> I would have thought that pressing the button against an entry would
>>>>>> deselect it but it doesn't. I just see Inop displayed.
>>>>>>
>>>>>> Does anyone know if this is meant to work and if so - how?
>>>>>>
>>>>>> I'm using build 372 of the CDU.
>>>>>>
>>>>>> --
>>>>>> Regards,
>>>>>>
>>>>>> Ray
>>>>>> Cheshire, England
>>>>>>
>>>>>
>>>>
>>>
>>
>

Enrico Schiratti
04-14-2006, 05:08 AM
> I don't think this feature is working as you describe. Having used
> NavExtract to deselect Sth America I restarted the CDU and the Areas
> Select
>
> screen still shows Sth America as active. It's not a major issue - I just
> wanted you to be aware of how it's working.

So it is merely the display that isn't active/working?

Ciao

Enrico


> "Enrico Schiratti" wrote in message
> news:409587.81263@wb.onvix.com...
>>I think the NAV DATA SELECT just shows which areas are active after
>> NavExtract has been used... the > next to the areas is thereby out of
>> place.
>>
>> Ciao
>>
>> Enrico
>>
>> "Bill Trinidad" wrote in message
>> news:407336.81263@wb.onvix.com...
>>> Hi Ray,
>>>
>>> I shall try to add and then remove SA the next time I fly, and will get
>>> back
>>>
>>> to you.
>>>
>>> Cheers,
>>>
>>> Bill
>>>
>>> "Ray Proudfoot" wrote in message
>>> news:407329.81263@wb.onvix.com...
>>>> Thanks Bill. I've downloaded and run NavExtract. I don't understand
the
>>>> point of the buttons on the CDU because even after deselecting Sth
>>> America
>>>> in NavExtract that area still shows as Active in the CDU.
>>>>
>>>> Perhaps another thing that Enrico has to implement when he has the
> time.
>>>>
>>>> Cheers.
>>>>
>>>>
>>>> "Bill Trinidad" wrote in message
>>>> news:407328.81263@wb.onvix.com...
>>>>> Hi Ray,
>>>>>
>>>>> I use the NavExtract with the screen shown on PM's NavData page and
it
>>>>> works
>>>>>
>>>>> great.
>>>>>
>>>>> I have not tried ( I didn't even know it was possible ) to use any
>>>> buttons
>>>>> on the CDU.
>>>>>
>>>>> Cheers,
>>>>>
>>>>> Bill
>>>>>
>>>>>
>>>>> "Ray Proudfoot" wrote in message
>>>>> news:407286.81263@wb.onvix.com...
>>>>>> Anyone else with this problem???
>>>>>>
>>>>>>
>>>>>>
>>>>>> "Ray Proudfoot" wrote in message
>>>>>> news:406643.81263@wb.onvix.com...
>>>>>>> I'm tying to deselect areas in the nav data I never fly in such as
>> Sth
>>>>>>> America and Pacific. The Nav Data option on the Index page has a
>> Areas
>>>>>>> Select option that displays the 6 areas and currently they're all
>>>>> active.
>>>>>>>
>>>>>>> I would have thought that pressing the button against an entry
would
>>>>>>> deselect it but it doesn't. I just see Inop displayed.
>>>>>>>
>>>>>>> Does anyone know if this is meant to work and if so - how?
>>>>>>>
>>>>>>> I'm using build 372 of the CDU.
>>>>>>>
>>>>>>> --
>>>>>>> Regards,
>>>>>>>
>>>>>>> Ray
>>>>>>> Cheshire, England
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>