ACP Panel Potentiometers and SIOC Creator

[iwik]

Hi guys,
I am a little puzzled over the pots used on this panel. When i look at SIOC Creator
and click the pots the config boxes show and Output,Input and where the axis is connected.
Does this switch have a led associated with it and what is the purpose of the switch.
Also i dont quite understand what these definitions in the Pull down menu for Joystick mean.
I am trying to see what i can use for all the Analogue pots in this panel. Was thinking of some
interfaces like Bodnar boards.
Appreciate any comments.
Regards
Les

[flykarli]

Hi guys,
I am a little puzzled over the pots used on this panel. When i look at SIOC Creator
and click the pots the config boxes show and Output,Input and where the axis is connected.
Does this switch have a led associated with it and what is the purpose of the switch.
Also i dont quite understand what these definitions in the Pull down menu for Joystick mean.
I am trying to see what i can use for all the Analogue pots in this panel. Was thinking of some
interfaces like Bodnar boards.
Appreciate any comments.
Regards
Les
I use these potentiometers: http://https: //www.pollin.de/p/autoradio-potentiometer-alps-rk098132t01ta-240615 with Leo Bodnar BUO836A cards. However, I only show 8 of the 15 potis. I have modified the potis and switch the button lighting with an additional button which is mounted on the back of the potis. But I am not completely satisfied because it does not work optimally.

[iwik]

Flykarli,
Nice job and thanks for the detail.
Les