testing

[kenfly]

Testing to see if iam in right place to send message
Thanks, kenfly

[kenfly]

Testing to see if iam in right place to send message
Thanks, kenfly

Hello all,
I am trying to get auto brake switch working,

In sioc config devices. autobrake 737 LINKED. MCP V3 ifly 737 tex LINKED.

On monitor inputs & outputs from rotary switch work.

In sioc edit script inputs & output have been changed for rotary switch

Sioc in, host address ok, Io card master, 0,15,1,90 mcp,1,4,1,115 auto brake

MCP working working ok in fsx
Autobrake not working in fsx

I am running fsuipc,iocp if737,sic 6.0

Hope someone can help me to get switches working.
Thanks Kenfly.

[kenfly]

trying to send a post regarding oc expansion and master card problem.
Need help, thanks kenfly.

[iwik]

Whats your problem?.
Les

[kenfly]

Hi Les,
Thanks for your reply.

oc expansion and master cards problem.

I am trying to get auto brake rotary switch working.


in sioc config devices auto brake 737 LINKED, mcp v3 ifly 737 tex LINKED.
On monitor inputs lights working with rotary switch.
in sioc edit scripts inputs have been changed for rotary switch inputs

Sioc in. host address ok, iocard master 0.15.1.90. mcp 1.4.1.115 auto brake.
mcp working ok in fsx. auto brake not working in fsx.

I am running win7 fsx ifly737 fsuipc iocpif737 sioc 6.0
hope this helps.
Thanks again, ken.

[kenfly]

Hi Les, thanks for your reply.

oc expansion and master cards problem.

I am trying to get auto brake switch working.
In sioc. config devices, shows auto brake linked, mcp v3 linked.
On monitor panel inputs lights working with rotary switch.
In sioc edit, inputs have been changed for rotary switch.
Sioc in. Host address ok, iocard master 0.15.1.90 mcp 1.4.1.115 auto brake.
Mcp working ok in fsx. auto brake not working in fsx.

I am running win 7, fsx, ifly737. fsuipc, icp if737, sioc 6.0

Hope this can help to get switches working.

thanks again, ken (kenfly)

[iwik]

Hi Ken,
I am no expert in SIOC but will try and help.
Is this MCP a Opencockpits one?
What script(sioc.ssi) file are you running.
Which plane are you trying to get the Autobrake to work in.
Are you using any other inputs on the m/c and are they working. Is this m/c an extra one and not associated with the MCP?
If you are using another m/c then you will have to adjust the sioc.ini file to reflect this.
Post the ini file you have for sioc, it may help .
Have you double checked that the correct switch inputs are declared in your
SIOC.ssi file?
Les

[kenfly]

Hi Les,

I am sending a reply to your post for the second time l as I have a feeling that the reply I sent earlier may not have got through to you.

"Sorry for the delay in replying.

My MCP is an OpenCockpits one. The plane I am trying to get Auto Brake to work is Ifly 737 NG 900. I am running Bodnar boards, for gear, and homemade EFIS and throttle which is working ok on main machine.

Another machine only runs engine graphics with FSExpand.

I was running Autobrake 737 TEX but found that only working in FXS planes. I have now changed to B737 dual Ifly.tex. which I have changed inputs to match my rotary switch. Now, when I alter switch, it is not altering Autobrake switch but altering main DU and lower DU panels. At least it seems I am connecting to Ifly plane.

Hope this is

all making sense. ken

[iwik]

Yes it seems it's connecting alright. It appears your assignment is incorrect . What board is the autobrake switch
connected to.How do you assign the switch to the plane.
Les

[kenfly]

Hi Les, Thanks for replying.
The boards are o/c usb expansion card, master card,3t5 inputs connection card, 3t4 outputs connection card.

Rotary switch wires connected to 3t5 inputs card.

connections rto 12, off 13, 1=16, 2=14, 3= 17, max 11. Led connected 3t4 outputs card 13 and ground
B737 dual ifly text. ssi. in sioc.
Thanks again Ken (kenfly)

[iwik]

Can you attach your B737 ifly Text file. It will show me a bit more on how you have configured things.
Les

[kenfly]

Hi Les. Having trouble sending dual ifly tex to you.
Get back as soon as possible. Ken