RMSA330
02-14-2018, 04:04 AM
Hello everyone,
So i have a smaller problem that is causing me some headache. Up until B48, my TCAS was working properly both flying online on IVAO and offline with AI traffic. Since then i´ve been busy constructing my flightdeck and it´s not until now that i really have found the time to fly again.
I also added a third computer (which is the one driving both PFD´s and ND´s) and this is where i think this "problem" started.
I just finished getting the EFIS buttons (ARPT,CTSR etc) to work due to me forgetting to copy the necessary files to the computer running PFD´s and ND´s. But i am without TCAS. This has me believing it is something with my setup that i can´t figure out. All three computers are running the latest Jeehell version so it should be ruled out that it´s some kind of compability issue.
My setup is as follows:
PC1: Main computer running P3D and the FMGS server applications/modules (AP/FBW, SOUND, SERVER etc).
PC2: Running both ECAMS, Chrono, T.BR.Indicator and ISIS.
PC3 (troubled PC): Running CPT and FO PFD&ND and the software OVHD. I am 95% sure i have installed Simconnect on it, otherwise it wouldn´t have worked with PFD/ND´s right?
Part from TCAS, everything works like a charm. I have a hardware switch for toggling STBY and TA/RA mode, and i have also via the MCDU tested all the TCAS settings without any result.
Hopefully someone can help me figuring what might be wrong!
Robert
So i have a smaller problem that is causing me some headache. Up until B48, my TCAS was working properly both flying online on IVAO and offline with AI traffic. Since then i´ve been busy constructing my flightdeck and it´s not until now that i really have found the time to fly again.
I also added a third computer (which is the one driving both PFD´s and ND´s) and this is where i think this "problem" started.
I just finished getting the EFIS buttons (ARPT,CTSR etc) to work due to me forgetting to copy the necessary files to the computer running PFD´s and ND´s. But i am without TCAS. This has me believing it is something with my setup that i can´t figure out. All three computers are running the latest Jeehell version so it should be ruled out that it´s some kind of compability issue.
My setup is as follows:
PC1: Main computer running P3D and the FMGS server applications/modules (AP/FBW, SOUND, SERVER etc).
PC2: Running both ECAMS, Chrono, T.BR.Indicator and ISIS.
PC3 (troubled PC): Running CPT and FO PFD&ND and the software OVHD. I am 95% sure i have installed Simconnect on it, otherwise it wouldn´t have worked with PFD/ND´s right?
Part from TCAS, everything works like a charm. I have a hardware switch for toggling STBY and TA/RA mode, and i have also via the MCDU tested all the TCAS settings without any result.
Hopefully someone can help me figuring what might be wrong!
Robert