PDA

View Full Version : Re: Software Development 747 Systems



Michel Vandaele
12-01-2004, 02:07 PM
Hi Jonanthan,

Great to hear you are working on it.
The fuel synoptics are looking ok as far I see. I will send you separately

some more info and graphics.
Nevertheless I give you here some basics and the tank synoptics.

Center Wing tank / Main tanks

White - pump switch off
Green - pump on
Amber - pump pressure low

Stabilizer tank

White - pumps switch off
Cyan - armed for system logic operation
Green - pump on
Amber - pump pressure low

Valve indications

White - indicates open or closed position of crossfeed valve
Green - indicates open or closed positions of crossfeed valve with fuel
Amber - valve position disagrees with commanded position
Magenta - whenever the valve is in transit.

Btw this is the same with other moving parts synoptics, for exemple gear,
when in transit flap indicator figure (1 -5 -10...) is magenta when in
transit and it become green when in position.

total fuel figure = white .

titles = cyan

Ciao

Michel

--
Michel VANDAELE
Member of the board FSCB
EBOS2002 Designteam
My B744 simulator project
http://users.pandora.be/michel.vandaele/sim1.htm




>
> We are currently working on the 747 systems, if any 747-400 experts can
> see
> any "graphical" errors with the Fuel system display (attached image) can
> you
> please let me know. We will be doing all the pages along with the systems
> over the next few days and thus any corrections would be helpful to know
> about. Thank you.
>
>
> Panel conditions shown:
>
> Amber Box: Pump ON but no pressure or fuel in tank
>
> Empty White Box: Fuel pump OFF
>
> Green Box: Pump ON with Fuel
>
>
> Regards
> Jonathan Richardson



--------------------------------------------------------------------------------


>

Jonathan Richardson
12-01-2004, 02:22 PM
Hi Michael

Thank you for the info. If you have further ref pics, please let me have
them. I have moved this posting to the pmSystems section.

Regards
Jonathan