HgQuecksilber
03-13-2016, 05:10 PM
Hi fellow builders,
after having red several sioc tutorials I am still unable to run ANY script after 3 Days now.
I use an USB-Expansion-Card and connected a Mastercard to it. In SIOC-Monitor everything works fine and i can light up an LED in Output 11. When i toggle my switch Input 1 gets activated.
Now i wrote a script to activate the LED when the Switch is on.
I checked that the script functions in IOCP-Console.
I also tried to use a script from the OC-website, which didnīt work either.
I think the problem has to do with the connection between script and card. In the "config devices"-window i linked the only script to the only shown card. And here happens something which looks strange to me: The #Cards gets 0 because it is 0 in the script.(shouldnīt it be 1 in the script?)
Also after this all in- and outputs get grayed out in the SIOC-Monitor. The Controll-LED on the USB-Expansioncard illuminates steady but still nothing happens when i turn on the switch.
http://www.mycockpit.org/forums/attachment.php?attachmentid=11298&stc=1
I hope someone can give me the little hint i need to get this going, thanks a lot in advance!
Thomas
after having red several sioc tutorials I am still unable to run ANY script after 3 Days now.
I use an USB-Expansion-Card and connected a Mastercard to it. In SIOC-Monitor everything works fine and i can light up an LED in Output 11. When i toggle my switch Input 1 gets activated.
Now i wrote a script to activate the LED when the Switch is on.
I checked that the script functions in IOCP-Console.
I also tried to use a script from the OC-website, which didnīt work either.
I think the problem has to do with the connection between script and card. In the "config devices"-window i linked the only script to the only shown card. And here happens something which looks strange to me: The #Cards gets 0 because it is 0 in the script.(shouldnīt it be 1 in the script?)
Also after this all in- and outputs get grayed out in the SIOC-Monitor. The Controll-LED on the USB-Expansioncard illuminates steady but still nothing happens when i turn on the switch.
http://www.mycockpit.org/forums/attachment.php?attachmentid=11298&stc=1
I hope someone can give me the little hint i need to get this going, thanks a lot in advance!
Thomas