PDA

View Full Version : PM commands don't work anymore via FSUIPC



null null
11-26-2004, 02:37 PM
Hi,
I am using a GoFlight RP48 module as an EFIS
None of Project Magenta commands of the GF-RP48 via FSUIPC seem to work
anymore although in the FSUIPC window they are recognized and can still be set.
Only the direct commands to flight simulator, such as altitude setting
(barometer) and altitude reset (B) seem to work.
My Horizontal Display (by GC) is on a networked PC
Any ideas? Thanks
Rob

Thomas Richter
11-26-2004, 05:07 PM
Hi Rob,
from GoFlight you get get the KeyMapper, maybe it will work.
http://www.goflightinc.com/downloads/gfkeys/GFKeys0100.zip
--
Best Regards
Thomas - EW321

"Robert Vandenberghe" schrieb im Newsbeitrag
news:272484.54110@wb.onvix.com...
> Hi,
> I am using a GoFlight RP48 module as an EFIS
> None of Project Magenta commands of the GF-RP48 via FSUIPC seem to work
> anymore although in the FSUIPC window they are recognized and can still be

> set.
> Only the direct commands to flight simulator, such as altitude setting
> (barometer) and altitude reset (B) seem to work.
> My Horizontal Display (by GC) is on a networked PC
> Any ideas? Thanks
> Rob
>

null null
11-27-2004, 04:49 AM
Thanks, but my problem is that the RP48 is connected to the FS PC whereas the
CG is on another one. So, I cannot key command another PC, can I? If I
connect the RP48 to the other PC then I will loose the key commands used
directly for FS. The problem is that it worked before and suddenly it failed. I
don't know if I have meanwhile installed another version of something.

Thomas Richter
11-27-2004, 01:03 PM
Hi Robert,
with KeyMapper you can use GoFlight-Cammands as normal KeyBoard-Commands and

with this KeyBoard-Commands you can program over FSUIPC by Keyset.
--
Best Regards
Thomas - EW321

"Robert Vandenberghe" schrieb im Newsbeitrag
news:272570.54110@wb.onvix.com...
> Thanks, but my problem is that the RP48 is connected to the FS PC whereas

> the
> CG is on another one. So, I cannot key command another PC, can I? If I
> connect the RP48 to the other PC then I will loose the key commands used
> directly for FS. The problem is that it worked before and suddenly it
> failed. I
> don't know if I have meanwhile installed another version of something.
>

null null
11-27-2004, 02:07 PM
Thanks Thomas, I will try that and let you know.
Cheers

null null
11-27-2004, 03:48 PM
Problem solved. As I have mentioned in a later post, it was a false setting
of the ND. It was by accent put in "first officer" mode.
Anyway, thanks for you concern, Thomas
Cheers
Rob