2 x graphic cards in SLI - dissable and use one for panel?

[Vonduck]

Hi guys,

Currently my setup is for P3D2.2 which doesnt really work well with SLI enabled (i have all the tweaks and the graphic anomalies etc etc.)...

All my screens are running from the one card (GTX670oc) at this stage..

I am wondering if it would be better to -

1. Disable SLI
2. Connect my 2 18" screens which would display the gauges to the 2nd card (GTX670oc)
3. Leave the 2 x 27" screens running from the other card

Would this work and make things a little easier on the system? At this stage Nvidia don't have a true SLI profile for Inspector so the work around is OK but the graphic spikes and artifacts are not so appealing!

Ideas?

Cheers

Doug

[jeehell]

Hi,

On this kind of things, only you can test and do your own benchmark unfortunately...

regards,
JL

[Vonduck]

Haha!

Yes... lack of responses would seem to indicate there is no definitive answer eh..

Thanks for chipping in JL..

Ill give it a go and see... will report back here in case someone else has a similar set up

Cheers

Doug

[rhysb]

I would only run p3d off one card as SLI does not work in anyway with the Esp engine.